Showing results for 
Search instead for 
Did you mean: 

Forum Posts

stripped screw on z270i itx

i was planning to add m.2 nvme but when i was about to pull out the screw the 2nd one got stripped. i thought i was the onlyone having this problem but i saw few people complaining about it. ended up damaging the screw just to pull out the heatsink. ...

Maximum Hero IX - Unable to update BIOS

Hi,I have a Maximus Hero IX (Revision 1.xx), Intel i7 7700k, 32Gb RAM. My BIOS is version 0505.I have tried upgrading to the latest BIOS (1301) by using the EZE3 tool within the BIOS itself and via the BIOS flashback option. While it seems to update,...

Lee_R by Level 7
  • 2 replies
  • 0 kudos

MAXIUS IX, Cant boot anything, USB, DVD tried everything. BSOD

Hey guys I have a maximus ix and its been up and going for about 3 years working fine. My niece and nephew came over and managed to download some "free games" about 2 weeks later i start having issues. This may or may not be the problem. I came upsta...

ROG Maximus formula X no USB-C 3.1 Gen 2 on front panel connector

Hi All,Since installing my Maximus MB I have never been able to get my Oculus Quest and more recently my Sony Xperia 1 II to connect via the front panel USB-c 3.1 connector as a 3.0 device. The USB-c port is only recognised as a standard 2.0 port a...

Maximus Hero XI RAM Frequency and Multi-Core enhancement

Hi,Two questions if i may.1. Within EUFI>EZ Mode. My DRAM status is reporting as 2133mhz (See attached-DRAM-Status.jpg). However, elsewhere in EUFI (See attached: Multi-Core-enhance.jpg) i have XMP DD4-3597 and within Windows 10 Task Manager>Perfor...

FopaUK by Level 7
  • 0 replies
  • 0 kudos

My motherboard is no longer recognising or booting from my SSD

I've been having an error message for the past week every time I try to start my PC. The message would say -" Please enter setup to recover BIOS setting. After setting up Intel (R) Optane Memory or the RAID configuration was SATA Mode Selection must ...

AlleSea by Level 7
  • 0 replies
  • 0 kudos

Asus Rog Z270E ram problem slot B

I do not know what the problem is put memory into slot B, and the computer will not turn on, like slot B was dead, my memory is a framework Corsair 16GB (2x8GB) 3000MHz DDR4 CL15 Vengeance LPXSomeone knows how to solve?

barno78 by Level 7
  • 6 replies
  • 0 kudos

Problem installing Samsung NVME drivers

Hello!I have a problem installing the samsung nvme drivers available on their website (v 2.2).The disks show up in my device manager but they are using a windows driver. I cannot manually install driver or by running the driver update exe from sams...

g_tse by Level 7
  • 12 replies
  • 0 kudos