Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Maximus Code iX High speed USB 3.1 Issues

Hey peeps as the title states I've had issues according to my Oculus Quest 2 reaching anything above 500mbps when it should be getting way higher speeds than that Id be happy with a few GB/s. I installed a older USB 3.0 pcie card from a older build t...

Z270 Strix E Bios keeps resetting

My bios keeps resetting after I turn power off. I did install gpu tweak and msi afterburner before it did it, Don't know how a software could cause bios to reset.I've only had the computer just over a week.

Z270-A reset bios after power restart

i have this problem on my Asus z270A.when I remove the power from the power supply at the next reboot the next day the pc turns on and off immediately, then it restarts and goes to recovery bios F1 (intel optane or RAID mode etc)I understand that by ...

sisoffi by Level 7
  • 1 replies
  • 0 kudos

Drives on 100% on Maximus IX Formula

Hi everyone, I have 6 drives in RAID5 configuration with one M2.1 drive that is used for OS while spindle drives are 7200 rpm (Drive size is 8TB each). For some reason those 6 drives utilization is on 100% all the time even if the computer doesn't re...

Maximus IX Hero and M.2 wifi

Does anyone know anything about the M.2 wifi connector on the Maximus IX Hero?On the motherboard schematic in the manual there is a connector shown in the upper-left hand corner called "M.2 WIFI". But then, there's no mention made of this connector a...

isaacc by Level 7
  • 37 replies
  • 1 kudos

NEW BIOS IS UP Version 1301 2018/04/20 {post threat here please}

Version 1301 2018/04/207.96 MBytesMAXIMUS IX HERO BIOS 1301Improved system stability.Improve system performance.Updated Intel CPU microcode.Improved DRAM compatibilityLet me manually backup my bios since i have full stability and i want to have my r...

ROG Maximus IX Extreme - Additional Pins?

Hello.There are some additional pins on the bottom of the motherboard. there is no mention of them in the manual.If they are for services and or RMA reasons which are understandable. But what about the ones with BIOS labels? Can a jumper make it poss...

Sonic Studio III and routing applications not working correctly.

I'm curious to why this feature doesn't work on my pc. I have to keep setting the default device to my current situation.When I play a game, I have to go in and set the default, and changed the default when I'm not gaming.Why doesn't routing feature ...

RAM Help & Info

Hi All I Have A MAX IV FORMULA I Have A Set of 4x 8gig Of CMK16GX4M2B3200C16 SO A SET OF 2 CMK16GX4M2B3200C16. Same Ram Same Set Same Numbers Same Timings 16-18-2T Running with XMP In Bios With 1.36v. In CPU-Z It Shows In The SPD Ranks That Slot*1 & ...

nufc179 by Level 7
  • 2 replies
  • 0 kudos