Specs: Motherboard: ASUS MAXIMUS XI Formula RAM: CORSAIR DDR4 3200mhzCPU: i7-7700kPSU: 750W CorsairGPU: GTX 1070 Founders EditionStorage: 1 TB SSD, and a 250 GB SSDNONE OF MY USB PORTS ARE WORKING OR PICKING UP MY KEYBOARD AND MOUSE. My computer was ...
Greetings,I've been trying to find a proper 4 pin Aura cable for this mobo, but haven't gotten much traction. I should have found two in the box, but only had one when I bought it.Google seems to want to show me 3 pin addressable products when I sear...
Hello I bought the asus maximus ix extreme and I noticed that the flow sensor is not spinning there is a solution??
Hi All, Intel recently released the 16.x series drivers for RST which includes support for Optane caching of *non-boot* drives. I've got a MAXIMUS HERO IX with 32GB Optane module that I'd love to use to accelerate the HDD that most of my apps are on...
So I'm running the Maximus IX Code with 1301 BIOS and I'm pretty sure that I read that AMI supports Bluetooth Keyboard in UEFI. I have Bluetooth enabled in UEFI and the keyboard is paired when Windows 10 loads but the keyboard is not seen or detected...
This should be a sticky at the top!After spending a little over a year of sending countless emails and messages to Asus support via, email, Facebook, and the Shapeways store I have finally gotten someone to respond. Mind you it has taken every bit of...
I built a system a while back, installed a 32GB Optane drive, and when I finished by build, I found out that it could only cache the boot drive so I just disabled it until recently when they changed this. Since I ran my loop with borosilicate glass t...
I just brought the Maximus IX Apex and did not realize that it only had 4 Sata Ports. Any suggestions for adding more ports?
Hi there!1. My system is about 8 months old, waterflow sensor in processor monoblock stopsvery often. And won't rotate after PC start for long time, at least one minute. Sure, water pump is working.2. I can't see any data from this sensor. How can I ...
Hey guys, so I started having an issue with my pc where my monitors went black but my computer still had power (fans were spinning and all leds were on). I couldn't get my display to show up. It read A0 in the q code section. Well After a few attempt...
