Z270
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

AIO pump: where do you connect it?

Hi guys. I was wondering where did you connect your AIO pump. I have an h100i v2 and at the beginning I have connected it to the CPU header, then I switched to the pump header and I have connected an exhaust fan to the CPU header.I have noticed that ...

Dan87 by Level 8
  • 315071 Views
  • 21 replies
  • 0 kudos

Super slow boot time (10min+)

HelloI just dont know what the issue might be but I press the power button and it takes about 10 minutes to get to windows.Recently did a full reset of windows because I couldnt find out what might cause thisComp specsi7 7700kMaximus IX FormulaSamsun...

Asus ROG Maximus Formula…..problems

So the other day I took my pc apart to clean my loop and ever since my pc hasn’t boot up. I have an i7-7700k and a Maximus formula ix. So far what I have done is….. pretty much everything. I just unplugged literally everything and it still doesn’t wo...

maximus IX code!

hello alli have maximus ix code then after 2 years last night i see something and i want to know more info about it:oi know this MB have 2 12V RGB headers on top and buttom but as you can see in picture(NUMBER 25) there is another 2 connector i dont ...

IX Hero will not boot gpt drive

IX hero, 7700k, geforce 970Ive tried basically everything and this thing wont boot gpt drives. as soon as I turn csm off and try to boot a gpt drive the motherboard just goes back into the bios. I converted an mbr drive to gpt using mbr2gpt and nothi...

Converting from BIOS to UEFI

Hi all. I have been running this Maximus IX Hero for several years in essentially legacy mode -- at least from a boot perspective. I have an Intel i7 7700K processor with 32GB RAM, TPM 2.0, and an Intel 660p NVMe m.2 system drive running 64-bit Win...

TPM 2.0: How can I disable without data loss?

Hi,I've successfully activated TPM 2.0 and it shows up in Windows 10. Now I'd like to disable it. Changing from Firmware TPM to Discrete TPM opens a pop-up window telling data loss could occur. So how can I disable TMP again. Do I have to start in Wi...

z270G QFan and CPU_OPT

Hello!Question: How does the CPU_OPT function on the z270g motherboard?Additional context: I have been reconfiguring the QFan setup in the BIOS as I have had a change in physical fans in the system. CPU_OPT does not show up within QFan Control but...

Hero IX - hangs on many different codes

Hi. I have a Hero IX for a number of years and in the last year I have been experiencing issues starting-up from a cold boot. It's not as simple as there being a single Q code that the system hangs on. There seems to be a different one each time. A f...

Z270 board reqauied, Please help!!! My PC is ruined :(

Hi,I have sent my computer in a box as luggage in a flight. I've received it in peices and now I need a new OLD board.Was looking at the Maximus Extreme IX - It has this monoblock which doesn't fit with my AIO cooler.SO first Question:- Will the boar...