Asus Strix Z270E wont Wake UP after Sleep and sound issue

[AguchoB]

Case : Cooler Master CM 690 III
PSU : Toppower Nano 800w 80 Plus Bronce (from my old PC)
MB : ASUS Strix Z270e
RAM : Corsair Vengance White Led (2 x 8GB) DDR4 3200MHz (CMU16GX4M2C3200C16)
Graphics card : ASUS GeForce GTX 1070 8GB ROG STRIX Edition
CPU : Intel i7-7700
O/S : Win10 Pro 64-bit
DVD drive : LG SATA drive
SSD : Kingston V300 240Gb
Keyboard: Corsair Gaming K70 RGB RAPIDFIRE Mechanical Keyboard, Backlit RGB LED

-------------------------------------------------------------------------------------------------------------------------------------


Hi, how are you, recently updated my PC and buy an Asus Strix Z270e, a micro intel i7 7700, an asus strix 1070GTX and memories Corsair Vengance White LED 2x8 3200mhz whose voltage is 1.35 according to what I read in the text of the manufacturer.
The problem I currently have is only when I use the suspend / sleep option of the computer, at that time the computer is suspended and everything goes off, so far so good, the subject is when I move the mouse or press any key on the keyboard to return to Use the pc, at that moment it becomes slow and the screen goes black, after a while returns to the desktop and lock everything or sometimes just the screen is black and the pc is restarted.

Another thing is that sometimes the sound gets in like noise and it makes a noise like a shot and it suddenly raises the volume.

Try flashing the motherboard: with all the bios of the page and the same lock and restart.

Try installing the latest drivers or installing the drivers that theoretically would and will do the same.

try reinstalling Win 10, anniversary and Creators updates.

Try CMOS Clear nothing happens same error.

For me it is ram configuration problem or something like that or I do not know if the ram is faulty, I hope it is not the motherboard ..

Now im using the bios that came with the DVD and the manual

i dont think thats its an Nvidia driver problem cause i try changing my new 1070gtx with my old one 960gtx and the same problem occur

[wiley1st]

Not sure about the sound problem but check the "MAXIMUS IX CODE sleep mode issue thread" for a similar sleep problem.

[AguchoB]

i was in that post, recently i did those steps, but doesnt resolve my problem, i dont know whats the f.... its.

so now i will takeit netx week to the reseller to see if the replace with a new one.

maybe is the Psu i dont know, its strang cause the PSU its 800 Real watts, Plus 80 Bronce.


http://www.topower.com/product/TOP800WB.html thats the PSU

[wiley1st]

AguchoB wrote:
i was in that post, recently i did those steps, but doesnt resolve my problem, i dont know whats the f.... its.

so now i will takeit netx week to the reseller to see if the replace with a new one.

maybe is the Psu i dont know, its strang cause the PSU its 800 Real watts, Plus 80 Bronce.


http://www.topower.com/product/TOP800WB.html thats the PSU

So you set ErP Ready in the BIOS to enable S4+S5 and, in Windows 10, modified your power buttons and power plans? That seemed to fix the problem for me.

[AguchoB]

After a long day the been a private technology and drivers detective, im manage to find at least a posible fix to the issue, for me was a conflict with Intel IRST (Intel Rapid Storage Echnolgy) , i procced with the instalation of all my drivers and apps, but didnt install the IRST driver and didnt made the Raid, so far so good., im runing everything with the XMP profile activated and the suspension, till now, running ok.


Dont update theto Intel(R) 6 Series/C200 Series Chipset Family 6 Port SATA AHCI Controller -- this driver and the IRST its causen bad functions..


in next week or month i will be doing an update to comment if any happen.

thx alot to all who participate in the thread and by private messahe thx chino.

[Nate152]

At the top of the Dram Timing Control page try Maximus Tweak Modes 1 and 2 and see if this hellps.

You could rake the ram out, match up the kits and try one 2x8GB kit.

[AguchoB]

i will try that, im using a corsair 2*8 kit.