I thought it might be best to start a new thread, coming out of this other one, but in short, I enabled XMP Profile in my Ezmode BIOS to get my Corsair DDR4 DIMMs up to their OC speed of 3200 Mhz-- two 16 Gb DIMMS (for a total of 32 Gb) inserted in Slots A2 and B2 on my VIII Hero -- and my system booted up fine into Windows 10 Pro 64-bit, but went to a blue screen of death within 5 minutes or so.
Disabling XMP, and going back to stock 2133 Mhz on the two 16 Gb sticks seems to be more stable, and no more BSODs. But the timings chosen by EzMode BIOS (F7) were 16-18-18-36-1.344V, and then the second time, 16-18-18-36-1.5V. Everything else is kept at stock and untouched.
How do I even go about solutioning this or debugging it? I'd love to get my DDR4 RAM clocked in at its rated OC speed of 3200 Mhz. I'd really appreciate tips, guidance, and recommendations on how you'd go about doing this.
Here's my build. Only thing installed right now is Win 10 Pro 64-bit, Intel Chipset Driver, and NVIdia GeForce Drivers (Graphics, 3D Vision Controller, and RealTek Audio).
NZXT Noctis 450 Mid-Tower Black and Red LED Case (not that this should matter, but might as well!)
ASUS ROG Maximus VIII Hero ATX
Intel Core i7 6700 Unlocked LGA 1151 4.0 Ghz
Corsair Vengeance LED 32GB DDR4 3200 RAM - CMU32GX4M2C3200C16
ASUS ROG Strix GeForce GTX 1080 8 Gb GDDR5*Enhanced Edition
Samsung NVMe SSD 960 EVO M.2 1 Tb Drive
Crucial CT SATA SSD 512 Gb Drive
Corsair H115i Extreme Performance 280mm Liquid CPU Cooler