07-31-2016 11:19 AM
07-31-2016 11:30 PM
08-01-2016 08:56 AM
08-01-2016 10:36 AM
08-02-2016 07:13 AM
Are you using the indicated memory slots for your motherboard when running 2 memory modules?
16GB of 3333MHz shouldn't be too much of a struggle.
My board has the odd ratio feature for the ram, if yours does on the extreme tweaker tab try enabling this.
In Dram Timing Control check you have the command rate set to 2, at the top you can also try Maximus Tweak modes 1 and 2.
Corsair ram seems to be the most problematic on ROG z170 boards but raising voltages can help, your 6700k could have a weak Integrated Memory Controller too.
You can try the Dram voltage up to 1.50v which is still in the purple, anywhere from 1.15v to 1.25v for the vccio and cpu system agent voltages should be enough.
In the DiGi+ section there are some RAM options, you can try setting Dram current capability to 130%, without going in there I can't remember what they all are but there should be another ram feature you can set to extreme.
08-02-2016 07:27 AM
I have all 4 slot filled. 4x4gb
08-02-2016 12:50 PM
In that case, is that a single memory kit?
08-02-2016 12:52 PM
It came in a set of 2 modules each.
08-02-2016 01:30 PM
08-02-2016 04:30 PM
As long as you purchased the 16GB kit as a single kit and didn't make two separate purchases you did right.
Does raising the DRAM voltage help?