Z170 - Page 52 - Republic of Gamers Forum

ASUS Maximus VIII Extreme stuck on VGA LED with code 62 and RAM issue

Hello everyone,I have just finished my first PC build but I ran into some issues.First, the motherboard would display a 55 error code and the DRAM LED was stuck on a solid orange.I have 4 8GB DDR4 3400 MHz sticks. I tried different things and now I a...

Black Screen issue upon startup..

I did a clean install of Windows 10 UEFI around 6 days ago and I have had this issue 2 times now but not had it in the past since I build the machine 2 years ago.I boot up my system and monitor and it will hang on a black screen I remove the Display ...

Long boot time after instaling NVIDIA drivers - quick boot without

Hi,I know, this sounds like a NVIDIA driver problem but also might be related to the mainboard, so please dont discard my question, since I am also investigating on the NVIDIA side.On a fresh installed Windows 7 in UEFI mode with up to date drivers, ...

MAXIMUS VIII Ranger with Corsair H100i v2

I have the MAXIMUS VIII Ranger mainboard and for cooling the CPU i use the Corsair H100 v2. I have the problem that with Qfan Control in the BIOS setted to [DC Modus] the fan of the H100 v2 is not working (0 rpm). I disabled the Qfan Control and now ...

Maximus VIII Impact Ethernet port troubleshooting

Hi All, I recently finished a new HTPC build after a few issues with a return board that had 3 bent pins,,now I had intended to try another brand at a much lower price point but it came missing a io shield and any hardware and cables at all and also ...

960EVO Clean Win10 Install

HiTomorrow I receive the Samsung 960EVO and I would like to find information, guide for the clean installation of the operating system in my Asus Hero VIII.WIn 10 Creators is in boot USB now.Thank you very much for the information.a greeting

How correctly to overclock the RAM on the boards of the series RoG?

Hello friends!Would you like to know how to properly overclock the RAM on my board Maximus VIII ExtremeI've never done this before.If there is a detailed instruction with screenshots or video here or where?Share your experience. I will be very gratef...

Any recommendations for best possible settings for a non overclocked 6700k?

If anyone here has a good setup that hasn't overclocked their cpu i'd love to see your bios settings. I want to see if there's some minor things i might have to change.

Offset voltage lowering on Maximus IX

I have a Maximus IX with a 4.2 Ghz i7-7700K. Cooler is a Krakin x61. Case is a Corsair Master Box 5t. Graphics card is 1080 Ti.I have it set for 5.0 Ghz and SpeedStep. It idles down to 800 Mhz and runs at the 5 Ghz. I have voltage set to Offset.CAM ...

RGB strip length more than 2m

Hello everyone!I bought a 5 meter long RGB LED strip and cut into 2 equal pieces for lighting up the top and bottom of my desk. Then, using a Y-splitter, I connected them to the M8F's RGB Header and they are working perfectly in all modes with very g...

Forum Posts