I have been using two monitors with one connected to my graphics card and another connected to the motherboard via the VGA output. I recently tried to connect a third monitor to the DVI-D port using a DVI-VGA adapter but the monitor is not detected a...
Motherboard model: Maximus VIII HeroUEFI Version: 1402CPU: Intel i7 6700KMemory kit part number (s) and amount in GB: Gskill f4-3800c15q-16grr 16GB(4x4GB)GPU: Visiontek R9 290XSSD/HDDs/Optical drives: Samsung Evo 850 500GBPSU: Corsair AX1200iUSB Devi...
Good morning everybody,In the process of changing the thermal paste of my CPU I noticed this weird coloration of the motherboard on the left side of the CPU socket.Here are some images to better explain the situation:Anyone know what could it be? Or ...
I've read that old hardware can be damaged by hot plugging PS/2 devices but what about this motherboard? Decent modern hardware should be fine, right?
Hi guys, I oc'd my i5-6600k to 4.4 @ 1.2 v, I would to switch to offset / adaptive mode to lower the voltage at idle. When I set offset mode it shows the signum and the offset value only, where do I need to set the base voltage?Should I turn off Turb...
Hello,I bought a used ITX Bundle. Unfortunately I am experiencing some problems and the original owner won't respond or help. Says 'everthing worked fine' what I find hard to believe.....Here are the specs:Asus Maximus VIII Impact Z170Intel Core i7 ...
A few months ago I re-installed Windows 10. At that time I could run setup from the ASUS MB Setup DVD and installed a few things from it. The A-V app I'm using is an up-to-date Windows Defender. My Win10 PRO is 10.0.15063 .Today, when I loaded the...
Hallo,I found a new Firmware on Station-Driver for ASMEDIA-USB-Controller. Version 150707_30_02_10Is it usefull to Flash this Firmware?. I have the following Problem, my ASMediacontroller can't boot usb-sticks. But the Intel-Controller can.
Thanks in advance to anyone that can help:I've been having an issue with my VIII Gene since about a week after purchase where the POST takes between 25-30 seconds before the ROG logo appears. I've tried all the recommended bits (MRC FB, CRS Boot Disa...
Hello,So I've had my motherboard for a while, and when I did my initial Windows install, I realized I still had CSM enabled, which meant the boot sequence in the end was at least thirty seconds from button press to the login screen. So I setup a USB...
