Z170
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

CPU_FAN vs W_PUMP for AIO water cooler

Case: Fractal Define XL R2CPU Cooler: Fractal Kelvin S24Motherboard: Asus ROG Maximus VIII HeroProcessor: Intel Core i7-6700K 8M Skylake Quad-Core OC to 4.6 GHzMemory: 16GB G.SKILL Ripjaws V Series DDR4 SDRAM 3200 (PC4 25600)Graphics Card: ASUS GeFor...

nCubed by Level 7
  • 14629 Views
  • 7 replies
  • 0 kudos

Thank you

Just updated most of my drivers, againThank you Support for providing and explaining Edit : I thought MoKiChu was Asus Support, but no. So Thank you MoKiChu. As, if I remember correctly, my installed stuff was provided by him.Sorry Support for the in...

claudej by Level 7
  • 621 Views
  • 6 replies
  • 0 kudos

Maximus 8 hero Alpha

Good day gents got me one of these nice boards when power supply is switched on the board is completely dead no lights nothing does not even attempt to power on removed everthing and still same result

Sonic Studio II low and high equalizer sliders have no effect

Hello all, I have noticed in Sonic Studio that the 32Hz and 16kHz sliders have no effect on the sound output. All the other sliders work as they should. I am curious if anyone else has noticed this, and if so does anyone know how to fix? Using the...

SoobRex by Level 7
  • 4386 Views
  • 9 replies
  • 0 kudos

Crackling/Popping audio on HERO VIII

Lately, I have been getting stuttering audio and a pops coming from my headphones while plugged into the onboard audio also same when I plug them into a DAC but plugging in the headphones into a phone works perfectly fine. Also there was a post on re...

adiwitko by Level 7
  • 10697 Views
  • 15 replies
  • 0 kudos

VCCIO voltage completely stuck, manual setting don't work at all

On my Maximus Hero VIII, my VCCIO voltage was ridiculously high when set to auto after setting XMP (1.35v or so), so I tried to set it to a more reasonable 1.15v. Booted into windows.. 1.008v. Tried a million different settings, higher, lower, does...

ibtar by Level 7
  • 1355 Views
  • 0 replies
  • 0 kudos

Asus Maximus VIII Gene nvme runs only at 3.0x1 in m.2 slot

I am trying to understand why I cannot get my Samsung 970 EVO Plus to run at 3.0x4 in the m.2 slot. I have tried different bios settings that I thought would help but I could only get this to run at 3.0x1 in the m.2 slot. I purchased an adapter card ...