Hi guys I need an advice from you if I may ask.In short with my motherboard and my case I can't use the USB 3.1 type-c front panel connector of the case.Is there a way to add 3.1 header support to my motherboard by any chance?Thank you kindly for you...
Hello Guys.Since i updated my bios to Version 3703 my system dont work that well.My Problem is on the colt boot everyday i start my pc it dosnt post and show me the code 00 after i plug out the psu cable and plug it back on.It boots like when u do cm...
Hi all, I have just updated my bios to 3401 and now I cant seem to access it on start up. I get the page showing press Del or F2 to access bios but nothing happens when I press them, It just boots straight to windows. never had the Issue before, Cou...
Hi all,Until recently, I was running the 1902 BIOS on my Maximus VIII GENE. But a few days ago I decided to upgrade to 3703, to patch myself against the Meltdown/Spectre vulnerabilities.After flashing to 3703, my PC failed to POST. Looking at the Q-C...
Does anyone have any experience running two of the G.Skill F4-4000C19D-32GTZ 2x16GB kits for 64 gigs total at 4 GHz in an M8E? I want to try it, but I'm curious about the probability of success.
I added another new SSD today, but when I re-connected the sata 6Gb/s cables to the mother board, I don`t think the cables are in the order that I had them. The boot order in the UEFI BIOS is wrong. How do I correct the boot order without re-installi...
HI Everyone, i recently installed a 1080ti into my p5 open case with a extension cable so i can vertically mount it. I put everything back together and ran benchmarks yesterday. As of 7 AM EST this morning my computer would not show any video and app...
I am running on the Maximus VIII hero alpha. In regards to the specter/meltdown security issue,if I update my management engine driver and run the update tool, am I safe with 3504 BIOS, or am I not fullysafe until ASUS releases the 3703 BIOS?
I need an advice from you guys... Today i updated my BIOS to 3703. I checked all the other entrys on the ASUS Homepage and found the ASMedia USB 3.1 Firmware update. Thought it wouldn't hurt to update and started the process. Afterwards i got a summa...
So I purchased the Phanteks LED Strip to go with my Evolv case as well as the Phanteks 4 Pin RGB LED adapter made for Asus mobo. When the strip is connected to the RGB Header on the mobo the strip will not display red. I unplugged the led strip fr...
