I have been doing some research for a build I am about to start, and I was wondering if the following setup would workI am thinking it should if I can find a suitable ground on the motherboard to tie the ground to.If this would be feasible, then the ...
Just built a computer and I'm having a great deal of lag when doing just normal every day things in windows.It lags and stutters a lot of the time. Moving windows around and such... even just moving the cursor it jumps and stutters. Windows trail beh...
I see all kinds of posts both here and on Goggle with the same issue, but so many different causes and possible fixes. Hoping someone may be able to help here a bit.I am getting latency issues on my rig, built about 3 weeks ago, in the form of audi...
Hi peeps, the title explains itself. Is it really gone for good? I'm having some problem with my Corsair K95 RGB as its not detecting on "Cold Boot" when using USB 3.0Im only able to use USB 2.0 either on my front case USB slots or the mobo KeyBot po...
System Config:Maximus VIII Impact, BIOS rev 1504i6700kCorsair Dominator Platinum 3200 2x8GNepton 1200XL CoolerNo graphics card until I get the basic system functioningWindows 10 64 bitSymptoms:The system was working great. I upgraded the bios using ...
Hi,Since my build I haven't gamed a whole lot as I am very busy, but recently I played some games that went over 144 FPS and anytime it went over 144 FPS, I'd get a squealing buzzing noise coming from the CPU area on the motherboard.Before, I thought...
Hello, I got Maximus VIII Hero yesterday and Kingston Hyperx Fury 2400Mhz CL15 kit (2x8Gb). I keep getting Q code 53 on boot, with everything running, except no video output and dimm led shining orange. What I found on google is, that RAM is probably...
I have had quite a wide arrangement of issues with my system, I am not quite sure what is causing it, mobo, CPU, OS?Specs.Maximus VIII Ranger (previous BIOS 0401, current 0801)6700K @4.0GHz (underclocked by 200Mhz, still getting issues) temps 68c und...
Hello,i created a Uefi Boot USB Stick with Rufus (included Samsung 950 Pro Nvme Driver with NTLite). CSM is enabled. Started from USB-STick in Uefi Mode.I cannot find the Samsung 950 Pro in the Installation. I added also with F6 manually the Driver, ...
I have been using it since maximus series. ASUS but still failed to fully implement the quick boot feature. Post takes only 10 seconds. total system start-up time takes 19 seconds. but this time is 6 seconds with other motherboards. I have a samsung ...
