I ran the Front Base Driver update downloaded from the support page of the Maximus VIII Extreme, and after that, my OC Panel is completely blank!Initially I hadn't installed ROG Connect Plus, but even doing it didn't change anything.Any suggestions? ...
ive been trying to install windows 7.the things i do:enable csm support, select windows uefi for secureboot prepared w7 on usb and dvdintel 750 series 32/64bit drivers on a second usb pen drive and on another sata ssd.if im using the usb method, it...
The cable I am using:http://www.newegg.com/Product/Product.aspx?Item=N82E16812119380I have updated BIOS to 1902, unplugged and replugged the cable, and am using the top Intel ports. Is the cable potentially not actually Sata III and 6Gb/s? Is there a...
hey folks,ever since yesterday my pc is turning off automatically after the UEFI screen. The QCode turns to A0 for half a second, i hear the usual clicking sound from my mobo and then the QCode turns to 00 and i hear another clicking sound (the same ...
my pc specs: motherboard and cpu cooler are as mentioned in the title16gb ram(8*1 corsair vengence 2300mhz and 8*1 gskill rampage 5th gen 2300mhz)1tb seagate hdd, 252 or 256gb samsung 830 series ssdi7 6700k . not overclocked its a new pc using since ...
Greetings,I have a new motherboard on it's way and am interested in some opinions.Have been using a PCIE Creative Soundblaster Titanium Champion card for a long time - probably 6+ years. Been satisfied with itIs it worth trying out the onboard audio...
Hi All,Hero 8 came in the mail yesterday. After reading the forums, I am leary of doing a bios update prior to putting the system together. Should I just build and leave current bios and maybe EZ update later after system is up and running or go ahea...
Ever since I've got my Asus Z170 ROG Impact, I have always received the following POST error: "(A7) Me FW Downgrade - Request MeSpiLock Failed". After this it boots to Windows and everything works just fine.But this error still bothers me..And in the...
Hello everyone,I just finished building a new system with M8F, connected my Phanteks PWM hub fan to CHA_FAN4 and set it to PWM from QFan inside BIOS.Everything works fine but when booting up the PC all the fans spin at maximum speed, then back down t...
I have hero alpha board. When i first booted and ever since then my cpu voltage will go up to 1.49ish by itself just idling. I have manual mode 1.35v and 4.5 core clock. That is all i changed. Im worried the cpu is gonna cook itself.
