asus maximus VIII extreme vs h110i gtx

[Stephan030]

Hello all,

I build me a new PC only when I put the PC on it says fan error.
The corsair 110I gtx is Connected as followed. 2fans on top pulling
And are connected to the pump. The pump 3pin is connected to the CPU 4pins on the motherboard.
The sata is connected to the psu.
The link is connected on the USB on the motherboard.

When I start you will see the fan error. When I wait to long I see it rises till 80 degrees Celsius.
Then I turn off safely the PC before overheating.

I'm a lil bit noob in this but who can help me out?

Regards.

Stephan

[Stephan030]

Temperature was rising quick.. pump doesn't do anything I think

[Nate152]

If you can set the water pump to pwm set it to that, you'll have to read the pump speed with corsair link.

Make sure the sata power cable is fully connected.

[Chino]

Have you checked to see if the pump is working? Feel the tubes to see if the liquid is moving. If not, you might have a DOA.

[Xeonnemesis]

You should also be able to see the pump speed using Corsair Link and the included USB cable. I'm curious to see if it registers any speed at all.

[Stephan030]

I will let you all know in a couple of hours, when I am home from work..

[Stephan030]

Think it's a doa
No pump vibration.

[Stephan030]

Think it's a doa
No pump vibration.

[Nate152]

Yeah it happens sorry to hear, I guess the next step is to contact corsair.