Great guide, and a rather good way to hit your 1000th post!
I am still waiting for my ezp2010 to be delivered.
I noticed that in your file you have ezp2011.exe. Is there any firmware to be updated for the reprogrammer? Is it ezp2010v3 that you are using?
Haha thanks didn't even realize .
Nope same firmware I was using v3 as well I packed the program aswel as it's preset to the RVE chip and also for convenience.
Not the best guide but should cover everything people need to know about Reprogramming there BIOS Chips I added music to relax the mind 😉 .
For this guide I want to include the following information:
1. Disable driver enforcement as per the guide
2. If you are installing the EZP2010 driver from the DVD that comes with the product, mine did not work. Had to download the driver for win7 64 bit from www.ezp2010.com
3. When running the ezp2010.exe and the software shows that no programmer is linked, then while keeping open the application, re-plug the programmer again and it will be detected.
4. Check the firmware version of the programmer. Mine was v2.1 and upgraded it to version 3. Once upgraded the problem mentioned in point 3 was resolved.