UEFI 1801 for RVE10 and Strix X99 issues

[Nixon2992]

Who install this version BIOS can you write bugs and featured you found on it?

[Chino]

Installed it for my RVE10. No problems so far.

[Simps]

Installed on my X99 and no probs so far

[Darkest]

Updated from 1701 to 1801.

When "Advanced" => "Onboard Devices Configuration" => RGB LED option "In sleep, hibernate and soft off states" is set to "Off" system does not start. Screen is black, QCode stucks at "bF" and after a while PC turns down itself. Only BIOS reset helps to bring it back to life.

[Nixon2992]

Darkest wrote:
Updated from 1701 to 1801.

When "Advanced" => "Onboard Devices Configuration" => RGB LED option "In sleep, hibernate and soft off states" is set to "Off" system does not start. Screen is black, QCode stucks at "bF" and after a while PC turns down itself. Only BIOS reset helps to bring it back to life.

What frequncy you RAM sticks?
BF post code indiacte issues with ram/imc undevoltage.

[Darkest]

Nixon2992 wrote:
What frequncy you RAM sticks?
BF post code indiacte issues with ram/imc undevoltage.

I have four Kingston HyperX Fury Black 4GB/2666 (HX426C15FB/4)

[Chino]

Is it a single memory kit?

[Darkest]

Chino wrote:
Is it a single memory kit?

It is four sticks of the same model each one in individual package, not a 4 in 1.

[Nixon2992]

Darkest wrote:
It is four sticks of the same model each one in individual package, not a 4 in 1.

You system boot normaly if speed ram sticks is 2133Mhz?

[Chino]

Darkest wrote:
It is four sticks of the same model each one in individual package, not a 4 in 1.

Combining memory kits and modules is always a bad idea. Try removing your memory modules except for one to test.