02-21-2017 11:22 AM
09-13-2021 06:30 AM
i can try it later. the picture answers your question.
10-02-2021 09:18 AM
10-02-2021 09:34 AM
My motherboard: asus WS X299 SAGE/10G x299
I remove the asus thunderboltex 3 card:
because Old firmware that cannot be updated.
the thunderbolt port does not support usb 3. i can only use usb3 on the dedicated usb3 port.
when asus card is installed it creates problems for other cards including built-in 10g nic
so i changed the card with gigabytes GC-TITAN RIDGE (rev. 2.0) and install this card on WS X299 SAGE/10G x299
the titan ridge card is the latest card that supports the x299 chip, the GC-MAPLE RIDGE model (rev. 1.0) requires the pci express 4.0 connectors "so it doesn't work on x299"
Install GC-TITAN RIDGE (rev. 2.0):
0) vga install on slot3 and titan install on slot2
1) enable bios asus thundeborld card
2) select slot pciexpress = 2 " asus WS X299 SAGE/10G x299" support thundeborld only splot2
3) enable: gpio3 force pwr
4) security livel sl0
5) I don't know how to set the other parameters bios. if you know how to set them write it down.
6) connect cable 5pin on titan and connect to asus.
7) connect two pci power (the card works even without connecting the two pciex cables)
😎 not connect 3pin cable
9) not connect usb cable
installa minumum drivers: intel_thunderbolt_1.41.1155.0 but i have install bb intel_thunderbolt_1.41.1193.0
the card titan does not create irq problems, the card does not move the sequences of the other cards. the titan does not damage the operation of the other cards that I have mounted. the card does not damage the asus integrated nic.
drivers thunderbolt correct install and usb controller asmedia correct install
test thundebolt pass but I have no peripherals to test
I connected usb3.1 gen2 peripherals on the two thunderbolt ports and they work perfectly at the same time at 10GB / s
no errors no disconnections no problems under stress.
GC-TITAN RIDGE (rev. 2.0) firmware = 50
10-02-2021 10:22 AM
I have same board, and gigabyte alpine ridge v 1.0 card. yeh it works no problem, never tried asus card, cause i need two ports. i have a Titan ridge card, that sorta works, but more problems. i tried maple ridge, and was just more problems. I think my titan ridge is a 1.0?
10-02-2021 11:22 AM
alvarogiudi wrote:did you get any devices hooked to it? cause thats where you can see issues. i have a x99 with the asus card ex1? no problems with that one. I swear i bought and returned the one you have, cause i would boot up, nothing would show, had to unplug, re-plug the thunderbolt cable. just wierd stuff. Theres info out there, but i dont change much of anything. check out thunderbolt audio device forums, like universal audio, lots of thunderbolt info there.
I do not know the functioning of the other gigabyte cards and of this only one I bought I can tell you that it is the 2.0 version with fw 50 buy on amazon.com
this card has two thunderbolt connections and both of them also work for usb3.1 10gb and 5gb
if you have problems I can only tell you to buy the same card that I bought
do you know the parameters of the asus bios for thunderbolt?
10-03-2021 02:02 AM
did you get any devices hooked to it? cause thats where you can see issues. i have a x99 with the asus card ex1? no problems with that one. I swear i bought and returned the one you have, cause i would boot up, nothing would show, had to unplug, re-plug the thunderbolt cable. just wierd stuff. Theres info out there, but i dont change much of anything. check out thunderbolt audio device forums, like universal audio, lots of thunderbolt info there.