cancel
Showing results for 
Search instead for 
Did you mean: 

Some back USB3 Ports not working

Sem
Level 7
I have a problem my 2nd row of back usb3 ports they are not working at all devices connected to them are totally dead in and out of windows

according to the manual these are ports USB3_E56_E78

the 4 above them and the 2 below are working fine not sure why these are not i checked the bios and those ports are showing up as enabled

i am using a 5930k have SLI 780s and a X-Fi Titanium HD in the bottom red slot X8_4 i also have 2 SSDS and 3 HDDs connected so maybe the board disabled them because i have too many devices?

tried both 0802 and 0901 bios
403 Views
41 REPLIES 41

Hardliner
Level 11
You are right, but I sure want to read some happy stories, too, for I am about to start my build . . . and I guess I just want reassurance that "everything's gonna be alright."

¡¡¡ I__ju$₮__₩₳₦₮__₮☮__₱£₳¥__₮h€__₲₳₥€__₩i₮h☮u₮__i₮__hi₵₵u₱i₦₲,__₱l€₳$€ !!!

vmanuelgm
Level 11
I updated to 1701 and usb's connected to internal pins now work with Sandisk Extreme!!!

Used Gonzo updated rom uefi, no problem.

Good news!!!

🙂
Asus x670e Hero, 7950x, TG 7000, Master 4090, 970 PRO, 860 EVO, Intel 750,
SN850, SN750, 840 Pro, 2xSkyhawk 4TB, Pioneer S12U
EVGA T2 1600, Silverstone TJ11, Custom LC, Acer Predator x35, Philips OLED

Guys is it safe to flash 1701 official bios to a rampage v extreme 3.1, since the 3.1 has latest bios the 1502 and there isn't a 1601 or 1701 on the support page of that motherboard.

Thanks
Sorry for hijacking this.

Kotronas wrote:
Guys is it safe to flash 1701 official bios to a rampage v extreme 3.1, since the 3.1 has latest bios the 1502 and there isn't a 1601 or 1701 on the support page of that motherboard.

Thanks
Sorry for hijacking this.


Of course, no problem cos they are the same...


EDIT: usb ports connected to internal pins work randomly again with Sandisk Extreme... 😞
Asus x670e Hero, 7950x, TG 7000, Master 4090, 970 PRO, 860 EVO, Intel 750,
SN850, SN750, 840 Pro, 2xSkyhawk 4TB, Pioneer S12U
EVGA T2 1600, Silverstone TJ11, Custom LC, Acer Predator x35, Philips OLED

coyi1895
Level 10
I noticed some saying about the 2 usb 3 ports next to the LAN port aren't working. Just a thought, do you have an X4 card in the PCIE_X4_1 slot? If you do then the 2 usb 3 ports (E9 and E10) next to the LAN port, including sataexpress E1 and PCIE_X1_1 slot are all disabled. Nothing is broken there.

Hopper64
Level 15
I have an x1 device in that slot, a creative SBZ card, and those ports still don't work. I tried removing that same card and they still don't work as well.
MZ790AE Bios 1703, GSkill F5-8400J4052G24GX2-TR5S, 14900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ HK block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Crucial T705, Windows 11 Pro

coyi1895
Level 10
Yeah, X1 and X2 wouldn't disable the 2 usb ports except the sataexpress E1. That's the only thing I can think of.

Hardliner
Level 11
Could we use USB 3.0 hubs if we needed them?

Like this: https://www.massdrop.com/buy/juiced-systems-10-port-hub?referer=YKV8DR&mode=guest_open&utm_source=Sa...
¡¡¡ I__ju$₮__₩₳₦₮__₮☮__₱£₳¥__₮h€__₲₳₥€__₩i₮h☮u₮__i₮__hi₵₵u₱i₦₲,__₱l€₳$€ !!!

vmanuelgm
Level 11
Hi again, guys.

Updated ASMedia usb 3.0 Firmware, and now the usb ports are all working very well.

If you wanna update the firm, here is the link with files. You can do it from Windows...

http://ul.to/888ezf3s

Kind regards.
Asus x670e Hero, 7950x, TG 7000, Master 4090, 970 PRO, 860 EVO, Intel 750,
SN850, SN750, 840 Pro, 2xSkyhawk 4TB, Pioneer S12U
EVGA T2 1600, Silverstone TJ11, Custom LC, Acer Predator x35, Philips OLED

vmanuelgm wrote:
Hi again, guys.

Updated ASMedia usb 3.0 Firmware, and now the usb ports are all working very well.

If you wanna update the firm, here is the link with files. You can do it from Windows...

http://ul.to/888ezf3s

Kind regards.


Anyone tried the link? Does it work?
I already got a 2nd RVE replacement...just installed it and got the same issue which was the reason for replacement. Does not work. with any of my USB pen drives. Those do work on other USB ports (even with the USB3.1 PCIe card) though.
Are the two USB ports next to the ETH wired to another controller?
The LEDs go on when I insert the pen drive, it just goes undetected by the OS.