Rampage V Extream Network & error code 70

[thomas6677]

Hello

My Rampage V Exteam has two problems:
After a soft reboot (no power of cycle) the mothorbord hung in status code 70.
In Linux (Fedora 23 / 26) and also in Win 10 the networkadapter is not working after reboot.

For code 70 problem I can make a power off and on and all is working.

For Network problem I have to disable the Network adapter and enable them and after that it is working again. (this is for windows)
In Linux I use this comands to bring it up:

systemctl restart network-online.target
modprobe -r e1000e
echo 0 > /sys/devices/pci0000\:00/0000\:00\:19.0/enable
echo 1 > /sys/devices/pci0000\:00/0000\:00\:19.0/reset
echo 1 > /sys/devices/pci0000\:00/0000\:00\:19.0/enable
modprobe e1000e


I did a lot of testing with both bios and diverent Versions 3701,3504 and reset to the default setings but nothing help.

Has someone any helpfule tips what I can do next to fix this two strange problems?

Linux Error:
[root@luck ~]# dmesg |grep e1000e
[ 10.583743] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 10.583745] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 10.583913] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 11.591499] e1000e: probe of 0000:00:19.0 failed with error -3

Error message from window:
Protokollname: Microsoft-Windows-Kernel-PnP/Configuration
Quelle: Microsoft-Windows-Kernel-PnP
Datum: 06.08.2017 00:22:56
Ereignis-ID: 441
Aufgabenkategorie:Keine
Ebene: Fehler
Schlüsselwörter:
Benutzer: SYSTEM
Computer: DESKTOP-GI9JR6Q
Beschreibung:
Das Gerät "PCI\VEN_8086&DEV_15A1&SUBSYS_85C41043&REV_05\3&11583659&0&C8" konnte nicht migriert werden.

ID der letzten Geräteinstanz: SWD\IP_TUNNEL_VBUS\ISATAP_0
Klassen-GUID: {4d36e972-e325-11ce-bfc1-08002be10318}
Speicherortpfad:
Migrationsrang: 0xF000FFFFFFFFF112
Vorhanden: true
Status: 0xC0000719
Ereignis-XML:



441
0
2
0
0
0x4000000000000000

652


Microsoft-Windows-Kernel-PnP/Configuration
DESKTOP-GI9JR6Q



PCI\VEN_8086&DEV_15A1&SUBSYS_85C41043&REV_05\3&11583659&0&C8
SWD\IP_TUNNEL_VBUS\ISATAP_0
{4D36E972-E325-11CE-BFC1-08002BE10318}


0xf000fffffffff112
true
0xc0000719



-----

Wired Networking Product
Intel(R)I2?18-VbasedN?etworkCont?roller(OEM?)
Driver Version
12.15.22.6
Hardware IDs
PCI\VEN_80?86&DEV_15A?1&SUBSYS_8?5C41043&RE?V_05

Informationsliste Wert
Netzwerkkarten Eigenschaften
Verbindungsname Ethernet 3
Verbindungsgeschwindigkeit 1 Gbps
Schnittstellentyp Ethernet
Netzwerkkarte Intel(R) Ethernet Connection (2) I218-V
MTU 1500 Bytes
Hardwareadresse (MAC) 10-C3-7B-A1-4F-6A
DHCP-Lease läuft ab 09.08.2017 23:52:36
DHCP-Lease erhalten 08.08.2017 23:52:36
Bytes gesendet 14720 (14.4 KB)
Bytes empfangen 65806 (64.3 KB)

Netzwerkadapteradresse
IP- / SubNet-Maske [ TRIAL VERSION ]
Gateway [ TRIAL VERSION ]
DNS [ TRIAL VERSION ]
DHCP [ TRIAL VERSION ]

Netzwerkadapterhersteller
Treiberupdate http://www.aida64.com/driver-updates
Treiberdownload http://www.intel.com/support/network
Produktinformation http://www.intel.com/embedded
Firmenname Intel Corporation


Gerätemanager:
Problemcode: 0000000A

Problemstatus:
{Vorgang fehlgeschlagen}
Der Vorgang konnte nicht durchgeführt werden.
C0000001

Status:
01802400
DN_HAS_PROBLEM
DN_DISABLEABLE
DN_NT_ENUMERATOR
DN_NT_DRIVER