Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Q-code " CE "

kaese
Level 10

‎10-20-2014 02:59 PM - last edited on ‎03-05-2024 10:06 PM by Community Admin

Hi guys, my brand new Board goes continiously into BIOS and does not start the system it halts on CE Q-code which is not listed in the table in the manual (it goes C3 C9 and stays then on CE).
Switching the BIOS let me start the system once but after that: same thing stuck in BIOS.

Current configuration is with only 1 RAM module and only one VGA card and no OC.

Does anybody know where to find out the not documented codes or what is the reason for this behaviour?
0 Kudos
17,942 Views
2 REPLIES 2

Chino
Level 15

‎10-20-2014 03:19 PM

CE means that you're in the BIOS. If you do not have a OS to boot into, the motherboard will throw you into the BIOS.
Overclocking The Core i7-7700K With DIP5 |Overclocking the Strix GTX 1080 | OC Panel & OC Panel II Guide | Overclocking i7-6700K to 4.6GHz | R5E 128GB DDR4 Setup | Liquid Cooling GTX 980 Ti Poseidon | R5E M.2 FAQ
0 Kudos

kaese
Level 10
In response to Chino

‎10-20-2014 06:11 PM

Thanks, for the info. Weird the board did not give any information about that. Anyway my USB stick (with the bootable OS) was sometimes booted and sometimes (in the same USB port) - strange behavior - but now I installes OS.
Cheers
0 Kudos