05-01-2019
11:17 AM
- last edited on
03-06-2024
08:18 PM
by
ROGBot
05-05-2019 09:32 PM
Inácio Jr. wrote:
I have a Rampage V Extreme, I7-5820K processor, DDR4 memories, Dominator Platinum 3000Mhz, 15-17-17-35 CR2, and Bios updated to the latest version (3801)
I made an overclok 4.5 Mhz with VCORE of 1.624, it is stabilized and passed all the tests.
But I have a problem, every time I reboot the computer, it shuts down instead of being restarted.
I noticed that you are giving a Q-CODE 6F error, I looked in the manual and did not find anything that could help me.
I ran a test, reseated the BIOS and used the XMP of the memories, and rebooted and the computer was rebooted normally.
I would like a help from you so that I can use in 4.5Mhz, the only inconvenience is that: Every time I need to restart it turns off.
05-05-2019 10:52 PM
05-05-2019 11:34 PM
05-05-2019 11:45 PM
05-07-2019 01:29 PM
clio16v wrote:
Can you tell me please the name of the program you have in your post? As for your problem, try to make a backup of your settings in the bios, reset the bios settings, load backup settings and try again. If it does not work then it's an OC problem so try your settings again. It can be anything that causes the problem so you have to change settings one at the time to isolate the problem.
05-10-2019 03:01 AM