Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

OC unstable when nvme M2 SSD is utilized.

enyceedanny
Level 10

‎02-22-2017 11:07 PM - last edited on ‎03-05-2024 10:47 PM by Community Admin

During OC testing, I boot off a mechanical test drive with a fresh install of Windows 10, and after exhaustive testing and finding perfectly stable settings, I replaced it with my main drive nvme 950 pro. Decided to run a few tests just in case, and after quite a long run of tests it ended up failing.

It seems that it's due to the extra PCIE lanes being utilized.

Anyone ever experienced this before? Which voltage do you think is responsible? I'm thinking either the VCCIO or System Agent. Though I am going to further test each voltage, it takes way too long to find a conclusive answer - hence I would like to at least get some feedback on this.

Thanks
0 Kudos
642 Views
3 REPLIES 3

kaese
Level 10

‎02-23-2017 11:29 AM

Did you overclock your Bclk? It could also be a problem from using a Bclk other than 100 MHz. If so, try with it set to 100 MHz.
0 Kudos

enyceedanny
Level 10
In response to kaese

‎02-23-2017 04:02 PM

kaese wrote:
Did you overclock your Bclk? It could also be a problem from using a Bclk other than 100 MHz. If so, try with it set to 100 MHz.


Nope, it's at 100.
0 Kudos