01-11-2016
11:48 AM
- last edited on
03-06-2024
03:07 AM
by
ROGBot
01-11-2016 11:54 AM
01-12-2016 06:34 PM
Menthol wrote:
Amazing timings from what we have seen so far on DDR4, hope this is a sign we will see even lower timings on kits of less density
01-12-2016 11:08 PM
01-14-2016 06:01 AM
01-14-2016 06:54 AM
The Veterant wrote:
I agree with Menthol on his comment, I own a 2800Mz 128GB kit from GSk and I did set them up manually to 2800 Mhz cause the XMP wont go for it at less on my motherboard with Bios 2001. But the results at 2800 vs the 2666, I can get better results at 2666 then 2800.
My humble opinion is to wait like Menthol have mention or if you really want to have that kind of memory kit make sure your CPU and I mean the memry controller is a strong one, cause you will need it and don't expect peaches and cream with XMP cause its not going to happen, don't get frustrated it and don't blame the memory kit. This kit it will have to run on 125 Strap and 125 blck so strap on your self to the journey, good luck. My kit needs to be set @ 2800 mhz w/ 127 strap and 125 black, need also to set the Boot voltage to 1.410 and eventual voltage to 1.360 or 1.370 volt w/ 4.5Ghz CPU clock and 4.0 Ghz cache.
01-14-2016 06:26 AM
01-14-2016 10:10 AM