Intel 750 pcie SSD

[Menthol]

Just letting you know it works like a champ, stuck it in the bottom pcie slot, put the driver on a usb stick as I installed Win 7 so I needed to install the driver during installation, install went kind of slow but without any issue on bios 1401. It also came with a back plate on it un-like the models seen in the reviews so it looks better not seeing the components on the back of the card

[Hopper64]

Just checked for my 750 and there's no firmware update with DCT 2.2.3. Thanks.

[Hopper64]

New driver's installer prompted to uninstall old NVMe driver first, no problem. Installed the new driver after reboot and rebooted again. In add/remove programs the original driver version is still there, 1.0.0.0, not 1.2.0.1002. ?? Odd.

[The_Veterant]

I'm not an expert on this guy, but what I did in system manager was to update driver. when you uncompressed the file there is two folders one that has the exe file and the other with the drivers. I used the one to just update the driver cause if the driver give you problems you always go back to the previews one.

[Hopper64]

Oh, well, I forgot to check device manager. It is the correct driver. Don't know why add/remove has a different file version. Must be something left in the registry.

[squawker]

Same here, in add / remove still is Intel NVME Miniport and Filter Device Management 1.0.0.0, i suppose as you’ve said it is registry remains or perhaps it’s something different and not only a driver.

I say that because i have updated several times the P3700 driver and in the add / remove, the Intel NVME always stays the same 1.0.0.0 version, even though i ran the SetupNVME option to “Repairs errors ...”.

[Karl-Johan]

I'm gonna reinstall Windows 10 soon and was wondering if there's any point in doing a secure erase? Will I get any performance back or do just delete old partitions and then rely on TRIM?

[Chino]

EK is releasing Intel® SSD 750 Series water block

[VIPER]

Does the 750 gets hot?

[Arne_Saknussemm]

VIPER wrote:
Does the 750 gets hot?

LOL....exact same question came to my mind :confused:

More important...does the inlet outlet line up with GPU inlet outlet...or is it off to one side?

[Hardliner]

I looks like it lines up . . . but where are the add-in card's 'golden fingers' in those pics?