cancel
Showing results for 
Search instead for 
Did you mean: 

DDR4-3000 Setup Guide For Rampage V Extreme

Chino
Level 15
42845


Users have been getting mixed results with getting their DDR4-3000 kits to work on the Rampage V Extreme. In theory, the setup process is quite straightforward. You enable the XMP profile in the BIOS and let the motherboard do the rest of the hard work. So why isn’t everyone getting the same results?


A Quick Explanation Of The Issue
The motherboard automatically assigns values to the different voltages for your CPU. Normally these values are on the Auto setting which means that they will scale accordingly when you enable the XMP profile for your RAM. ASUS sampled hundreds of CPUs to determine the scaling routines for the Rampage V Extreme. So unless you have a below average CPU, the Auto value is pretty much spot on.

The timings and the DRAM voltage for your memory kit is dictated by the XMP profile. But the motherboard also adjusts other memory related voltages as well. One of the more useful voltages for memory overclocking is the System Agent Voltage (also known as VCCSA on previous platforms). The System Agent Voltage is responsible for stabilizing the CPU’s integrated memory controller (IMC) to help you run memory with high frequencies.

Your memory goes through training at each system post. If your memory fails training because of insufficient System Agent Voltage, your system will halt with a bd QCODE visible on the Rampage V Extreme’s DEBUG LED.
42848



The Kit Used In This Guide
42851


I chose this G.Skill Ripjaws 4 F4-3000C15Q-16GRR kit mainly because of its excellent price/performance ratio. It’s currently one of the more popular DDR4-3000 kits in the market right now and most enthusiasts are rolling with this particular kit in their X99 systems. It’s comprised of four 4GB sticks rated at 3000MHz with 15-15-15-35 2N timings using 1.35V.


Preparations
At the time this guide was written, the latest BIOS was 0802. It’s highly recommended that you update your Rampage V Extreme to the 1801 BIOS since compatibility with XMP profiles and memory overclocking has been greatly improved. Many users were able to get their DDR4-3000 kit working on this BIOS without the need to tune the System Agent Voltage manually. But if it doesn’t work for you, continue on.

Since we’ll be focusing solely on the System Agent Voltage, we’ll add it to the My Favorites tab so we can get quick access to the option instead of scrolling all the way down the Extreme Tweaker tab to find it. So first we’ll open up the My Favorites tab.
42850


Once inside, we’re going to select the Extreme Tweak option on the left and scroll down to find the CPU System Agent Voltage.
42852


Click the + symbol beside the CPU System Agent Voltage to add it to the right column.
42853



Methodology
This guide will assume you’ve enabled your XMP and restarted your system. Once your system hangs at the bd QCODE, there isn’t much you can do. Even if you hit the Power, Reset or the ReTry button your system will simply restart and halt at the same QCODE as before. While most users turn to the Clear CMOS button at the rear panel to reset the BIOS values back to factory default, we’re going to take a different approach.

If you closely at the overclocking area, you will notice the little red button called Safe Boot. Pressing it will force the motherboard to reboot into the BIOS safe mode retaining all the previous settings that were changed.
42854


Once inside the BIOS, we’ll navigate back to the My Favorites tab. The System Agent Voltage is a sensitive voltage. Too much or too little voltage can lead to instability. The best approach is to use increments of 0.01V to find the sweet spot for your CPU.
42855


One of two things can happen at this stage.

  • If your system fails to post again, keep tuning the System Agent Voltage until you make your way into your OS.
  • If your system posted successfully and you’re able to enter your OS, proceed to the next phase.



Quick Stability Test
SuperPi provides a quick way to test the stability of your memory. The 32M preset relies heavily on memory access so that’s what we’ll choose. A typical run should take around 9 minutes on a stock i7-5960X.
42856


Should you encounter any signs of instability during the 32M test like BSODs, system freeze or SuperPi errors, go back into the BIOS and raise the System Agent Voltage another notch. Once you’re able to complete the 32M test, it’s time to do some memory stress tests.


Long-term Stability Test
HCI MemTest is one of the best programs to find immediate and long term memory errors if any are present. Since it’s a single threaded program, it’s recommended to run as many instances of MemTest as you have CPU threads to increase the program’s effectiveness.

On my i7-5960X, I’m running 16 instances to test my memory thoroughly. Since it’s time consuming to open each instance one by one, I’ve written a simple Batch file to open all of them with a single click. The only requirement is that the batch file must be in the same directory as the memtest.exe. For the other Haswell-E owners, you can edit the batch file in Notepad and erase the number of instances to match your CPU cores. Once you have your instances ready, open Task Manager. Look at the amount of unused memory available and divide it by the number of instances. The result will be the amount of memory you will type in the each MemTest window.
42857


Memtest is designed to run as long as you wish. But for an everyday system, four full passes (400% coverage) should be more than enough. But if memory stability is vital for your system, you can let it run overnight. If any errors show up, continue tuning the System Agent Voltage.

Just a reminder. Memory, when stressed just like any other component, will generate more heat than normal usage. So if your plan is to test your memory for prolonged periods of time, it is wise to put some sort of active cooling over the modules. It doesn’t have to be one of those crazy Delta fans that sound like jet engines. Any 120mm fan will get the job done.
42858


And to finalize this guide, here’s a screenshot of my i7-5960X finishing 4 full passes of MemTest. It’s not a good sample and needs a System Agent Voltage of 1.14V to run memory at 3000MHz. It’s been running for a few months now and there are no negative side effects of running at that voltage.
42859


There is no official word from Intel concerning the maximum safe System Agent Voltage so I cannot give you a number to go by. They used to put that information into their data sheets but they stopped doing so ever since Haswell came out. Currently the Rampage V Extreme has one of the most mature BIOS found on any X99 motherboard plus it has the OC Socket which certainly gives it the upperhand when it comes to memory overclocking. So you’ll find that you need less voltage than rival motherboards.
497 Views
233 REPLIES 233

Mosc_007
Level 7
I know it's not the same Kit but my Corsair LPX 2666 needed over 1.35 Volts to be stable at 3000 Mhz. Works fine at that speed on 1.38 Volts.

2666 is binned lower than 2800 though.


Charles
| 5930k at 4.4 Ghz | Rampage 5 Extreme | Corsair 4 x 4 GB 2666 Mhz | GTX 980 x 2 in SLI |
| 512 GB SSD x 2 in Raid 0 | Corsair 1000 Watt PSU | Corsair 900D Case | 90 Inch DLP Projector |
| Custom Water. 1 x 360 Rad, 1 x 420 Rad. CPU + 2 GPU's Water cooled |

Chino
Level 15
It all comes down to the silicon lottery. No two memory kits will overclock the same. Even if they are identical kits.

LiveOrDie
Level 11
I'm going to pick a 3000Mhz kit up today going to sell off my Corsair 2800 LPX i get to many problems using a 100BCLK with this kit.

Just got my 3000Mhz kit installed at 1st i was getting BD codes no mater what i did i could only get into the bios using safeboot one of the sticks wasn't sitting correctly in the slot, So i have this ram running at 3000mhz 15.15.15.35 @ 1.35v with my CPU on 4.3Ghz 100BCLK will see it its stable don't really want to use a BCLK other than 100.

ccambourg
Level 7
Hi All,
I have a serveral problem with my memory,
Config: rampage V 0802, Gskill F4-3000C15Q-16GRR, INTEL 5930K

only 2 slot is recognized on slot Dimm-1C and Dimm-1D on the BIOS and OS (win7 64bits)
CrossCheck ok, every memory works on the slot 1C and 1D

Thanks in advance

LiveOrDie wrote:
I'm going to pick a 3000Mhz kit up today going to sell off my Corsair 2800 LPX i get to many problems using a 100BCLK with this kit.

Just got my 3000Mhz kit installed at 1st i was getting BD codes no mater what i did i could only get into the bios using safeboot one of the sticks wasn't sitting correctly in the slot, So i have this ram running at 3000mhz 15.15.15.35 @ 1.35v with my CPU on 4.3Ghz 100BCLK will see it its stable don't really want to use a BCLK other than 100.

Memory at 3000MHz with the 100 strap is perfectly stable on the ASUS Rampage V Extreme with the Ripjaws 4.
42922


ccambourg wrote:
Hi All,
I have a serveral problem with my memory,
Config: rampage V 0802, Gskill F4-3000C15Q-16GRR, INTEL 5930K

only 2 slot is recognized on slot Dimm-1C and Dimm-1D on the BIOS and OS (win7 64bits)
CrossCheck ok, every memory works on the slot 1C and 1D

Thanks in advance

Clear your CMOS first to bring everything back to stock clocks for now.

Then reseat your memory sticks making sure you push them all the way down into the slot until you hear the "click" sound. If your problem persists, proceed to remove your CPU and examine the socket for any bent or missing pins. When reinstalling your heatsink, make sure you aren't overtightening the screws.

Chino wrote:
Memory at 3000MHz with the 100 strap is perfectly stable on the ASUS Rampage V Extreme with the Ripjaws 4.

Hello

The 2800 LPX kits are also fully stable using the 100 strap at 3000MHz, 15-15-15-1T.

Praz wrote:
Hello

The 2800 LPX kits are also fully stable using the 100 strap at 3000MHz, 15-15-15-1T.

Thank you for the validation. 🙂

Chino wrote:
Memory at 3000MHz with the 100 strap is perfectly stable on the ASUS Rampage V Extreme with the Ripjaws 4.
42922



Clear your CMOS first to bring everything back to stock clocks for now.

Then reseat your memory sticks making sure you push them all the way down into the slot until you hear the "click" sound. If your problem persists, proceed to remove your CPU and examine the socket for any bent or missing pins. When reinstalling your heatsink, make sure you aren't overtightening the screws.


Yes only with no Overclock if you add in overclocking its no longer stable.

Praz wrote:
Hello

The 2800 LPX kits are also fully stable using the 100 strap at 3000MHz, 15-15-15-1T.



Maybe on some kits others will no be stable mine wasn't all memory sticks are different and i'm guessing your not adding any overclocking into that testing?

LiveOrDie wrote:
Maybe on some kits others will no be stable mine wasn't all memory sticks are different and i'm guessing your not adding any overclocking into that testing?

Hello

CPU - 4400
Cache - 4100
Memory - 3000, 15-15-15-1T, 1.32V, 100 strap

Praz wrote:
Hello

CPU - 4400
Cache - 4100
Memory - 3000, 15-15-15-1T, 1.32V, 100 strap


You must have a good CPU or it maybe your uncore voltage your running i havent gotten to uncore overclocking yet.