Cannot Overclock at all on my R5E since using intel 750SSD... even just set XMP

[_RC_]

need help and need sharing from other Intel 750 SSD user (PCI-E Model) on their R5E who face the same problem as mine... before i was using Plextor M.2 SSD 2280 as my bootable drive (win 7 64bit) on my system, everything is ok, dont have any problem with all my system before... i made 3 oc profile with my system (4ghz/3000) (4.25/3000) (4.5ghz/3000) 3 of my oc profile is well setting, everything is very stable as i run so many test before. Then after i buy a new intel 750 ssd 400gb i plug this device on last (bottom) pcie slot and set my bios to all default setting (load optimized setting) and instal new os on it.. everything running well and i instal so many program bla bla bla... then after os already installed i try to go back to bios and try to load my oc profile, problem happened after i load my oc profile my system cannot go inside windows desktop... always bluescreen and loop back restart by itself.. really weird trying load all my oc profile always bluescreen, then i try again to make all bios setting default and just set xmp 1 and xmp 2 also bluescreen cannot go to windows desktop, but when i set all default everything running well into windows desktop, my system only want to boot into windows desktop only when i set all bios setting into default with no overclock at all...
my R5E now using bios version 1502, last night i already trying to move to BIOS 2 and upgrade my bios to 1601 and also try bios 1701 but the problem still there...
so now i just using my sytem with intel 750 SSD with all bios default setting.. cannot overclock at all, even my ram now just running 2133 😞
help me please...

[onnovampire]

maybe irq problem

[_RC_]

onnovampire wrote:
maybe irq problem

Can you explain to me more detail bro ? What is Irq problem... Thanks for your attention

[onnovampire]

interupt request, also some slots share bandwith with another slot or controller, everthing can look good in device manger, but rig can still be unstable. sudden crashes.

[Chino]

Did you make any changes to the BCLK in your OC profiles?

[_RC_]

Yes chino.. All of my oc profile bclk is set to 125. Problem is when I was using plextor m.2 ssd all of my oc profile is working normal can enter into windows desktop, I was trying also instal os into my 3.5 had drive and all of my oc profile also working great normal... Only when I use Intel 750 ssd all of my oc profile that I already set before cannot be use all of it.. Like what I said above, even in all default bios and I just set xmp 1 or xmp 2 my system cannot boot into windows desktop. Only in all default condition not over lock at all that can make my system enter into windows desktop 😞

[Chino]

Are you sure?

125 BCLK or 125 CPU Strap? They are not the same. 🙂

[_RC_]

Chino wrote:
Are you sure?

125 BCLK or 125 CPU Strap? They are not the same. 🙂

@Chino
i set all of my oc profile that is running 4ghz/3000 4.25ghz/3000 and 4.5ghz/3000 all cpu strap and bclk frequency set to 125, other setting BCLK frequency : DRAM frequency mode set to auto. problem only happen since i using this intel 750ssd, i never make any changes on my oc profile... even not running oc profile, just set xmp only already bluescreen when trying booting into windows desktop.. only in normal condition all default that can make my system running through windows desktop

[Brockmonster]

I have an Intel 750 PCI-e 400gb card and everything works fine, overclock @4.4

[Chino]

Correct.

Can you try setting up your RAM manually instead of using XMP? See if Window would load properly that way.