Can't overclock or use the XMP Profile I need help

[ReaperOneSIx]

I tried everything changing out the ram timing to the 14-14-14-34, Set the Memory to XMP, set the core voltage at 1.32 and even 1.34 volts
This is the specification of my rig.
Case: Thermaltake Core X71 Full Case
Motherboard: Asus Rampage V 10 Anniversary
Processor: Intel i7 5930K Six Core Processor @ 4.50Ghz
Cooler: Corsair H150i 360mm All in One Cooling
Ram: G.SKILL TridentZ RGB Series 64GB (8GBx8) 288-Pin DDR4 SDRAM DDR4 3200
Graphics: EVGA GTX 1080 Ti FTW 3 x2 SLI Black Edition Elite
Primary SSD (Primary Boot drive): SAMSUNG 850 Pro 4 TB
Secondary HD: HGST 6 terabyte
Third HD: WD Red 10 terabyte
Fourth HD: WD Black Edition 4 Terabyte
Optical Drive : LG Blu-Ray Burner
OS: Windows 10 64 Bit Pro
PSU: EVGA SuperNova 1300PSU Gold Plus
Speakers: Logitech 5.1 Z706 Speakers
Soundcard: Creative Labs Soundblaster Zr Soundcard
Monitor:27 inch Asus PG278QR 165 hertz G-Sync Monitor
Keyboard: Logitech G910 RGB Keyboard
Mouse: Logitech G903 RGB Lightspeed Gaming Mouse
Webcam: Logitech 920 Webcam

The previous motherboard I had died on me the new doesn't overclock as well

[ReaperOneSIx]

I fix it I had to look through my old forum post which I posted and I had select Mode 3 in my DRAM setting to get XMP to post

[BigJohnny]

whats your ram part number?
Is it all one kit or split
is it on the QVL list?
Im guessing not seeing how theres not a single Cas14 kit on the list at any speed.

[ReaperOneSIx]

It's on the QVL List I just had to enable the Mode 3 in DRAM timing