oc panel firmware
Hi, What exactly does updating the oc panel firmware do?It seems to be another black hole of information, like improved stability for bios.
Forum Posts
Can the boot screen be disabled, and still boot with native resolution?
I disabled the Rampage V boot screen and noticed post took significantly less time. The only issue is my boot loader and TTY console came up in lower than native resolution. This just makes it annoying when I have to drop down to a TTY since the res...
RVE10 Adaptive voltage not working.
Hey guys. I noticed that the adaptive voltage is not doing anything on my system. No matter what I set it to, it will give 1.271 during load (via CPU-Z) on my 6850K. Only when I adjust the Offset along with the adaptive voltage will the load voltages...
pc turn off
dearI assembled my new pc less than 1month but in this period my pc suddenly turn off.(not restarting) fully off. I do not do heavy work.can someone helpme.main board: rampage v edition 10cpu: 6950 xram: 4x16 tridentzvga: giga 1080 extemre
Raid 0 of intel 750 series pci need some help
Hello folks!!I would like to know if is possible to make a Raid 0 of 2 Intel SSDs 750 series 400GB PCI (non sata)I have just one gpu in the first PCI bay.Is there some incompability around the others pci bays? Until now i know that pci Raid 0 is po...
The embedded controller (EC) did not respond within the specified timeout period.
I am having problems with my system after upgrading from NVidia gtx 980 to ASUS gtx 1080 founders edition. I haven't had any random weird errors like this since my build yr ago. So after I swapped my card from 980 to 1080 I noticed random restarts, w...
Intel RealSense Camera SR300 with Rampage Edition 10?
Has anyone out there managed to get an Intel RealSense Camera working with Windows Hello using Edition 10?Can't seem to get the drivers to install properly (device manager image attached). Have tried uninstalling, reinstalling, etc.
BIOS 3301 - Hyper-V won't start.
I'm having an issue with Hyper-V on the 3301 bios; I was wondering if anyone had any ideas of what to try for a fix. I'm reluctant to downgrade, because I had an occassional reboot issue that seems fixed by the move to 3301.I recently updated bios f...
Memory change
I have this memory kit: http://www.corsair.com/en-us/dominator-platinum-series-64gb-4-x-16gb-ddr4-dram-3000mhz-c15-memory-kit-cmd64gx4m4b3000c15I am currently running 2400 memory that's in my sig with no problem. I thought I would try this memory aga...
GPU stops on post??
hiya all, after a few issues with my M.2 drive and windows 7 I have sorted that out with windows 10 but now come up with a new one that needs some help please,My set up all brand new,Ausus rampage 5 extreme ( upgraded to Bios version 3301 )intel i7...
