X99 - Page 8 - Republic of Gamers Forum

Windows 10 Hyper-V with Rampage V Edition 10

Has anyone tried Windows 10 Hyper-V with the Rampage V Edition 10?Have you had any problems?I have enabled VT-d in BIOS but I can't install Hyper-V and I get this message:"Hyper-V cannot be installed: Virtualisation support is disabled in the firmwar...

The Broadwell-E Overclocking Guide

http://edgeup.asus.com/2016/06/17/broadwell-e-overclocking-guide/

TPM 2.0 for Strix X99

Hello all,My configuration requires that I have BitLocker enabled on all drives. I run Windows 10 Pro (v10.0.14393). I have purchased a TPM module (TPM-M R2.0) through Amazon. I received the module, plugged it into my board, opened up the TPM adminis...

Board is occasionally taking me to bios update screen at boot.

Sometimes, the system boots me into the bios update screen. I think it usually happens after power cycling. I boot into the screen and just reboot, as I don't have a bios set to load. Does anyone know why I might be seeing that screen? Could it indic...

Rampage V , PCIE_16X/8X_3 Running 8X instead of 16X, Single RTX 3090

Hello mates,For Vram temperature reason and a huge Thermalright silver arrow i would like to put my RTX 3090 not in the first slot but in the third one ,check image (red oval)https://imgur.com/eTCB9X3Well, after some check i'm stupified, i forgot ?...

Rampage V edition 10 no post but R5E does!? 3200cl14 quad channel

Hey all,So I have a R 5 Edition 10 and a 1680v3. I am trying to get my quad channel kit of gskill 3200 cl14 to post at xmp. With bios at optimised defaults and nothing but xmp changed I am getting q code bd loops until q code cc appears. 2666 posts h...

RAMCache II V1.05.15 CANT INSTALLED

Hello Today I try to install RAMCache II V1.05.15 from the support motherbord driver but the install corrupted!Any ideas pls.Thanx.

Disconnecting Reconnecting USB Ports

I've read a few posts about this problem and was wondering if a solution has ever been found?My computer is disconnecting and reconnecting the USB ports all the time. I use all of them at the same time I got a lot going on! I'm using the 1701 bios ev...

Rampage V Driver Page Down?

I seem to be unable to access the driver page's for the Rampage V... Is it working for you guys?Edit: seems to work again now..

Overclocking and other issues with Asus Rampage V Edition 10

Greetings everyone:I just completed my first build and I am struggling to resolve some issues with Overclocking, Audio and M2 Drive. I have been a lurker here for a while now and am hopeful I will find a solution here:OVERCLOCKINGThe Motherboard doe...