I have Board initialization issues. When turning on the system it immediately halts with both a qcode and audio alert seemingly related to memory issues. I do have a 4x4 16GB memory kit of Corsair Dominator Platinum 3200 MHz (CMD16GX4M4B3200C16) whic...
I have an Edition 10 & wondering if I can use my gpus in slots 2 & 4 or 2 & 3?If so, will I still get x16 on both slots?I have a 40 lane CPU.*
First I have to go back a little. I use the R5E with a 5820K, Kingston HyperV HX430C15PB2K4/16, a MSI GTX 980, a Plextor M6e since late summer 2014. Late 2015 I changed the M.2 SSD to Samsungs SM951 and the GPU to the MSI GTX 980Ti Gaming. First with...
Hey guys, what's going?I hope that's fine!Sometimes when I start my pc to show me this screen bellow:y by AlSuite 3 in Windows 10. But now, my pc is totaly formated and with Windows 10 installed again.Why happen this problem "Over Clocking Failed!" T...
Dear.Can you help me about work phase control algoritm works?What is default mode(AUTO) and why in stock temp VRM about 50 degree of celsium ?
Hi,I've set my computer to go to hibernate after 60 minutes. Once the computer is in Hibernate, the system does not get back to work, after I hit the power buttton. The computer seems to start, but the start gets interrupted even without the monitor ...
A few hours ago I assembled my new PC and installed Windows 10. I installed mobo drivers first and then updated Windows. My problem is that when i finished installing everything I went to my audio settings and couldn't find enhancements tab for playb...
Perhaps this is a lame question, but when you have the WiFi enabled on your RVE, and you are connected via WiFi to your router, and the Ethernet cable is also plugged into the router, is there any advantage? Or is it OS dependent and you are only on...
Dear. Can you say actually is problem burning VRM for ASUS x99 mobo all generations? If it results of defect DrMos can you say volume of part x99(separately for all models) and percent of defect?
As the topic states, the board loses all BIOS settings after a power failure, or being hard switched off via the PSU.This issue affects both BIOS chips. Here's what I've done so far to no avail:1. Replace CMOS Battery (Tested as well, 3.3V)2. BIOS...
