X99
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

AI Charger+ port

Hello All,I just wanted to know which port is the AI Charger+ port? I looked in the manual and it does not mention it. My iPhone 6 is charging way too slow.Thanks

GPU Passthrough

Howdy,I am wanting to run linux and passthrough the gpu to a windows host. I know this is possible with this board however I have checked in the bios and cannot see a way of changing the primary gpu from slot 1.If i put my cheap ass card in slot 1 (p...

ASUS Rampage V Edition 10 - Error 69, 79, no BIOS post

Wooohooo! Let the fun begin. I built this machine back in February and had zero problems, well, except for one. The stupid audio DAC drivers are PURE JUNK. I seen today there was a update, so I went ahead and flashed the firmware. No change, said it ...

MaacK by Level 7
  • 4284 Views
  • 5 replies
  • 0 kudos

ASUS ROG Rampage V Edition 10

HelloIt seems that a new Rampage V Extreme happens ??http://www.overclock3d.net/articles/cpu_mainboard/asus_rog_rampage_v_edition_10_has_leaked_online/1But why this name "Rampage V 10 Edition" :confused:EDIT : It's probably that ROG is 10 years old

57433 57438
tistou77 by Level 15
  • 291269 Views
  • 536 replies
  • 19 kudos

M2 passive cooler

EK has their new passive cooler for M.2 SSD:https://www.ekwb.com/shop/ek-m-2-nvme-heatsink-blackI have tried to install this on my R5E10, but the screw for the SSD needs to be longer. The other concern is that the side of the passive cooler contacts ...

Hopper64 by Level 16
  • 6201 Views
  • 7 replies
  • 0 kudos

Possibly infected by a virus that affects the Bios

Hi, I got infected a few months ago. Long story short they can literally see my screen and all my information, clear signals of remote access, etc.I already explained aa bit on my orevious pot so want tell all my story again and will just describe my...

StriX X99 Water Pump header failing on Fan profiles

Dear ROG community,I have an issue on the ROG StriX X99 board, not able to control the pomp header by UEFI or Windows tools, i need to set it to 100% to let the Pomp doing it's job, but still that software is setting that pomp on 70% all the time, my...

SLI - HB Bridge compatibility

Hey,I have the Rampage V Extreme/3.1 motherboard, and about to get 2 1080TI's (Founders Edition) that I'm going to connect in SLI on slots :* PCIE_X16_1* PCIE_X16/X8_3As I understand, for best performance I need to connect them using high bandwidth S...

USB 3.0 Speeds

Hi,I bought an asus rampage v extreme motherboard which has 10 rear usb 3.0 ports available. we are using it to connect devices and copy software across but the m.2 PM961 ssd we are using is fast enough yet when using more than 1 usb 3.0 port the tra...

devdi by Level 7
  • 2760 Views
  • 5 replies
  • 0 kudos