Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Rampage V Edition 10 - Memory Issue

I just built a new PC using this board and used 4 DIMMs. Upon boot though only 3 of the 4 are being found. Slots B1, C1, D1 are all found but not A1. I reseated the memory and no change. I then swapped the DIMM in Slot D1 with the one in A1 and st...

Crash55 by Level 8
  • 21 replies
  • 0 kudos

USB Controller & Intel Virtualization Technology

There seems to be some problem installing, or to finding, the driver for a USB Controller. The USB 3.1 is working and so are the other USB ports. I tried the disc that came with mobo. I tried Win updates. Nothing works. I never had this problem befor...

memetic by Level 7
  • 3 replies
  • 0 kudos

Rampage v extreme fault code FB and B1

Hi, I have problem with my rampage v extreme, sometime on a cold boot I have the error code fb or B1 I try to play with system agent voltage no luck , cpu vcore and memory voltage still no luck.sometime my computer boot normaly sometime it take up to...

terii by Level 7
  • 11 replies
  • 0 kudos

AI Charger+ port

Hello All,I just wanted to know which port is the AI Charger+ port? I looked in the manual and it does not mention it. My iPhone 6 is charging way too slow.Thanks

GPU Passthrough

Howdy,I am wanting to run linux and passthrough the gpu to a windows host. I know this is possible with this board however I have checked in the bios and cannot see a way of changing the primary gpu from slot 1.If i put my cheap ass card in slot 1 (p...

ASUS Rampage V Edition 10 - Error 69, 79, no BIOS post

Wooohooo! Let the fun begin. I built this machine back in February and had zero problems, well, except for one. The stupid audio DAC drivers are PURE JUNK. I seen today there was a update, so I went ahead and flashed the firmware. No change, said it ...

MaacK by Level 7
  • 5 replies
  • 0 kudos

ASUS ROG Rampage V Edition 10

HelloIt seems that a new Rampage V Extreme happens ??http://www.overclock3d.net/articles/cpu_mainboard/asus_rog_rampage_v_edition_10_has_leaked_online/1But why this name "Rampage V 10 Edition" :confused:EDIT : It's probably that ROG is 10 years old

57433 57438
tistou77 by Level 13
  • 536 replies
  • 19 kudos

M2 passive cooler

EK has their new passive cooler for M.2 SSD:https://www.ekwb.com/shop/ek-m-2-nvme-heatsink-blackI have tried to install this on my R5E10, but the screw for the SSD needs to be longer. The other concern is that the side of the passive cooler contacts ...

Hopper64 by Level 15
  • 7 replies
  • 0 kudos

Possibly infected by a virus that affects the Bios

Hi, I got infected a few months ago. Long story short they can literally see my screen and all my information, clear signals of remote access, etc.I already explained aa bit on my orevious pot so want tell all my story again and will just describe my...

StriX X99 Water Pump header failing on Fan profiles

Dear ROG community,I have an issue on the ROG StriX X99 board, not able to control the pomp header by UEFI or Windows tools, i need to set it to 100% to let the Pomp doing it's job, but still that software is setting that pomp on 70% all the time, my...

Top Kudoed Authors