X99 - Page 50 - Republic of Gamers Forum

Rampage V Extreme + G.skill Trident Z RGB Ram ... Who has this combo ?

Anyone with a rve and g.skill rgb ram. Any issues with the memory? Seen g.skill release a new software to control the dimms for x99. I've just ordered this ram and want to make sure I won't have issues. If I there are issues I will then cancel my ord...

Problem with First GPU - only PCIX 3.0 @ 8x

Hallo all,I have just finished my new build this night.Now i have the problem, that my first GPU is only running PCIX 3.0 @ 8x.The funny thing is, that my second GPU (its the 480 GTX) is running at full 16x (its a PCIX 2.0 Card).Im using a M2, but i ...

AMDA00 Fix for x99 boards - Unknown Device ACPI\PNP0A0A

So I ran into an issue I've seen posted about across the internet where the AMDA00 device (the temperature sensor) would not properly install but instead show up in the device manager as Unknown Device (hardware id ACPI\PNP0A0A). I battled with my sy...

ASUS STRIX B250G and Microphone problem

Hello everyone, it's my first post on these forums. I need your help about my mic. First of all, i already searched for this issue on Google, even here but i couldn't find a solution. I already wrote the specifications on my profile page but ...

Use on board sound card and creative sound blaster zxr together at same time?

I have rampage v10 can I use on board sound card and creative sound blaster zxr with two speaker  together at same time? My os is windows 10 enterprise x64

Advice on a DDR4 kit?

For (two) X99 R5E mobo listed in my system specs.I'm looking for a *4x16GB* *single-sided* quad-channel DDR4 kit. Anything from DDR4-2400 to DDR4-3300, although faster is preferred lol.Looks don't matter, height doesn't matter. I can replace the he...

Rampage V Extreme wont start anymore

PC was running without any problems.All lights turning on. Tested the power supply all ok.Cables changed.But the system wont start anymore. Nothing happens.Any suggestions?Thanks

Boot performance mode

I was going thru bios and noticed boot performance mode. Default is max non turbo performance. Whats the difference in this setting vs max battery vs turbo performance? Is it for bios boot or os boot?

RAMPAGE V EXTREME MOTHERBORD b1 error code, monitor no signal.

Hi there.... I have built a PC end of 2015 and I have a ASUS RAMPAGE V EXTREME motherboard fitted. Occasionally there have been cases where upon powering up the PC the screen will remain blank with a no signal message displayed and an error code b1 w...

I may have jacked up my chipset drivers. Do I need to reinstall windows? Help!

Main hardware currently running and its config... so you know what im working with.Rampage V10 with a 6850k Clocked at 4.4 @1.37V linpack and AIDA64 stable. Peak temps 73c (avg 65 full load)Corsair 32GB DDR4 Plat 2400 running in XMP mode @2400. All t...