After being busy with AMD for more then 2 months i am not sure if it will or can be fixed I got a very difficult problem with the RX Vega Liquid that is causing random grey / black screensi have tried a lot to find out what could cause it, but i...
Hi all happy Easter something strange and didn't notice until i upgrade to a new PC case my hd led keeps flickering constantly right by the nvme drive where i have installed it on my rampage 10 mb looking at task manager it say 0% disk usage anyone...
Hello guysI have a problem with RVE that will drive me nuts.These are my system specs :-i7-5960XRampage V Extreme (BIOS 3801)16 GB Corsair Vengeance LPX DDR4-3000 Quad-Channel MemoryNVIDIA GeForce GTX 980 TiEssence STX II SoundcardSamsung 950 ProWind...
Hi,I'm now on my third X99 mobo, after my previous Asrock board couldn't deal with my RAM and my first one died. System doesn't post, hanging on Qcode b0. I'm assuming it's b0 as the 6 doesn't have the top 'bar' but I could be wrong. Code b0 means "r...
Who want to try is it possible to optimize RAID 0 bootable on X99.Installing 2x Samsung 960 EVO/PRO to ASUS Hyper Quad M.2 with single GPU on CPU with 40 PCI-E lanes.That would be very interesting if could work. Enough is two M.2.I heared that could ...
Rampage V - understanding "BIOS->USB Configuration" (BIOS v3701)is there anywhere, any place in plain English explained what the USB CONFIGURATION OPTIONS mean and do, enable? disable? what does each do?- Intel xHCI Mode -> ?- EHCI Legacy Support ->...
Thanks in advance for any help and advice.**My son was given a Rampage V over the weekend. In the search for a CPU to go on it came across a Xeon E5-1620 v3. So my question is A) would this be a good buy for this board and B) would there be any issue...
My system beens running pretty well, and just decided to stop posting. I've got an i7-6850k, 32g G-Skill Trident 3200 (4x8g) memory kit, a pair of GTX1080Ti Strix, and Corsair AXi 1500 PSU.It starts up with Q-Code 00 and just stays there. Everything ...
Hey guys! So I have had this problem since I got the build back in 2014. Today I thought I would try an solve it since I had time to play with again. The issue I am facing is that I have had to force my 16GB 4x4 Ram into a Dual channel setup (DIMM sl...
Hello guys,First of all I apologize for my weak English, but I hope you understand me and help me.Recently I'm having problems with the recognition of the 4 memory combs in Rampage V Edition 10, as it is only recognizing 3 combs.Before everything wor...
