X99
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

[R5E10] Error code BD

Hi guys I just purchase a monoblock from EK for my rog r5e10 and due to that i had to remove the mobo and install the monoblock. Once finished with the installation and re-sitting every component back in place, SSD/RAM/GPUs and upon booting am readin...

Which vccio voltage is which for rampage v extreme?

I'm trying to adjust the vccio voltages to get ram stable. I've read recommendations that vccio-d should be 50 mv higher than vccio-a, but I just see cpu and pch vccio in the bios. Which voltage maps to which?

Rampage V Edition 10 + Rx Vega Liquid Grey / Black screen problems

After being busy with AMD for more then 2 months i am not sure if it will or can be fixed I got a very difficult problem with the RX Vega Liquid that is causing random grey / black screensi have tried a lot to find out what could cause it, but i...

HD LED KEEPS Flickering

Hi all happy Easter something strange and didn't notice until i upgrade to a new PC case my hd led keeps flickering constantly right by the nvme drive where i have installed it on my rampage 10 mb looking at task manager it say 0% disk usage anyone...

EaglePC by Level 10
  • 3885 Views
  • 6 replies
  • 0 kudos

Rampage V Extreme Q-Code 78 and 68 weird issue with BIOS 3801

Hello guysI have a problem with RVE that will drive me nuts.These are my system specs :-i7-5960XRampage V Extreme (BIOS 3801)16 GB Corsair Vengeance LPX DDR4-3000 Quad-Channel MemoryNVIDIA GeForce GTX 980 TiEssence STX II SoundcardSamsung 950 ProWind...

Sam90 by Level 8
  • 9470 Views
  • 17 replies
  • 22 kudos

Asus ROG X99 RAMPAGE V EXTREME/U3.1 doesn't POST, code b0

Hi,I'm now on my third X99 mobo, after my previous Asrock board couldn't deal with my RAM and my first one died. System doesn't post, hanging on Qcode b0. I'm assuming it's b0 as the 6 doesn't have the top 'bar' but I could be wrong. Code b0 means "r...

M.2 RAID 0 on X99 with ASUS Hyper Quad M.2 x16 ???

Who want to try is it possible to optimize RAID 0 bootable on X99.Installing 2x Samsung 960 EVO/PRO to ASUS Hyper Quad M.2 with single GPU on CPU with 40 PCI-E lanes.That would be very interesting if could work. Enough is two M.2.I heared that could ...

72609
Vlada011 by Level 10
  • 2636 Views
  • 1 replies
  • 0 kudos

Rampage V - understanding "BIOS->USB Configuration" (BIOS v3701)

Rampage V - understanding "BIOS->USB Configuration" (BIOS v3701)is there anywhere, any place in plain English explained what the USB CONFIGURATION OPTIONS mean and do, enable? disable? what does each do?- Intel xHCI Mode -> ?- EHCI Legacy Support ->...

Labels