X99 - Page 310 - Republic of Gamers Forum

Updated to the new bios...

HelloI updated to the new bios, but now im having problems doing warm reboots, when rebooting the computer wont restart again, the monitor goes black, and i have to turn the computer off and on again, it runs otherwise stable!My hardware:Asus Rampage...

Should I upgrade from this 4770K ?

Hey guy if I have a 4770K @ 4.5Ghz @ 1.370V / 16GB DDR3 @ 2400Mhz on Sabertooth Z87 do you think this will be Night a Day to upgrade to 5960X and RVE ? Below are some of my numbers and as far I check 5510 is bottom of hwbot ranking so I knew I had a ...

If the brain memory is not enough, if the black is not black, if the monster coming t

This is teraser, this is something that you will love. More than review. But I need some time (all this will continue up to begin of November), need some people which can see more, know more...Srry for my english, but this will be about passion, abou...

Error code 00, and a major headache.

Just today I received my Rampage V Extreme board, and started building my system. I have the 5960x, G.Skill 2666 MHz 32GB (8GB x 4) RAM, 2 EVGA 780s in SLI, and a SeaSonic X-1250 PSU in a Cooler Master 942 case. I mounted and plugged everything up,...

Sata Express

Quick Question....The RE5 motherboard comes with two Sata Express connectors, am i able to put two Standard Sata 6g M500 SSD in the ports at RAID 0 with normal Sata cables or will i need to places them on standard Sata 6g ports?thanks

Rampage V 6f

I just finished setting up my Rampage V with 5960x. All started well updated bios messed with ocing a bit. Then all of a sudden the only way I can get it to post is to reset the bios. Rebooting or going into the bios and making any change results in ...

CPU overvoltage in RVE

Hello, Raja..I have been overclocking 5960X in the RVE, and the cpu overvoltage warning shows up over 1,54. I tried "ignore" in monitor with no luck..Is there anything to do??Thanks in advance.

Intel's Datasheet

HelloFor Intel datasheet about LGA2011-3, I find it It's quite confusing, I think

R5E with 5930K and F4-3000C15Q-16GRR GSkill Memory

Will R5E with a 5930K work well with GSkill F4-3000C15Q-16GRR? I don't want to purchase memory that won't operate at the advertised speed. Tried GSkill 2800 memory with a 4770K last year and it was a loss due to the IMC on the CPU. Never had a stable...

Rampage extreme ocpanel...

HelloI wonder how the ocpanel works, ive connected four fans to the panel, thinking i could use it as a fancontroller also, but when you change the fansspeed on the panel nothing happens, they just go full speed no matter what, is there any other set...

Forum Posts