X99 - Page 301 - Republic of Gamers Forum

Q-code " CE "

Hi guys, my brand new Board goes continiously into BIOS and does not start the system it halts on CE Q-code which is not listed in the table in the manual (it goes C3 C9 and stays then on CE).Switching the BIOS let me start the system once but after ...

Help on R5E Mosfet cooler.

So I recently bought a R5E and am planning to watercool when EK releases their Clean wb. However this requires me to remove the top mosfet/io cover. I was hoping to keep the io cover, but due to the heatpipe connecting the two I cannot. I could just ...

My USB with an ISO file of Windows 7 is not being seen

I am trying to get an operating system installed on my M2 drive. It is a Samsung XP941. Windows is giving me a message that I can't install to it and something needs to be changed in the BIOS . I have READ EVERYTHING here in the forums related to ...

bsod machine_check_exception with bios other than 0403

I got a weird issue with the RVE.First of all this is the hardware currently used:- RVE- 4x 8 GB Crucial DDR4-2133 (CT8G4DFD8213)- ASUS Radeon HD 7970 DirectCU II- 5820K- Enermax Revolution85+ 1050w- Samsung 830 256 GB- custom watercooling for cpu- W...

MDZCPA - Rmapage V/5960X build on the way :)

In November 2011, 2 days after X79 launched, I jumped on an X79 build with an ROG RIVE and 3960X. Right out of the gate I knew I was lucky when I got the 3960X up to 5Ghz stable for day to day operations with a little help from Raja. I scored a rea...

30 seconds boot, is that normal?

Hi everyoneone I hope you bare with me, but this is bugging me so much.As the title says, I think of a 30 seconds full boot is slow somehow, the post takes about 14 seconds to finish then windows will take about 16 seconds, in my previous build it wo...

Shiny spot CPU socket

Hi Just unpacked my Asus Rampage V motherboard and saw a shiny spot in the CPU socket. Is this normal or is one of the pins bent or defective ?The 5960 x CPU seems to fit onto it without any problems.What should I do ? Should I go ahead with Inst...

BIOS 2 Broken

HI like the board but BIOS problem similar to some here. New board, memory, GPUs. Upgraded BIOS1 successfully to 0706. Copied BIOS 1 to BIOS 2. Entered upgrading BIOS loop. Now can POST fine from BIOS 1 but BIOS 2 QCODE 00, only some fans working. EZ...

Q code 00

Okay I'm banging my head against the wall here hoping it's not a bad moboSpecsRampage V ExtremeIntel i7 5930K CPUGigabyte GTX980 Graphics x 2 in SLI32 GB Geil RAM DDR4 2600Corsair H100i water cooler unitFirst boot the Q codes cycled through 4 or 5 nu...

The last PCI-E slot (PCIE_X8_4) - Question

After long long wait (~6 years), I upgrade from RAMPAGE II to V. My newly-built machine is a 3-way SLI system and thus leaving only the last PCI-E slot (PCIE-X8_4) available for other PCI-E card. I bought an eSATA adaptor (PCI-E X1) for connection ...

Forum Posts