X99 - Page 28 - Republic of Gamers Forum

ASUS ROG Rampage V Edition 10 Thunderbolt 3 issue

Hi AllI just wanted to know if anyone can help me, I have a RVE 10 motherboard with BIOS Ver 1902, I installed Gigabyte Alpine Ridge Rev 2.0 Thunderbolt card in PCIe slot 2.0 x4_1 which is slot 3 on the motherboard , I got it to work initially see pi...

Problem with different temps CPU between AI suite3, core temp and hwmonitor

Hello,I have different temps on my cpu .What temperature is the right;I reinstall the Ai3 ,but the problem remain the same .Any ideas pls.Thank you.

BIOS Update for eDrive support (Samsung 960)

Hello,I'd like to know if Asus plans to udpate X99 BIOSes providing full support of Microsoft eDrive technology. This to allow enabling BitLocker on a Samsung 960 EVO/PRO set as boot drive.Apparently Samsung support says motherboards need a BIOS upda...

R5E mobo wont post no video signal

Mobo:Rampage V extremeCPU: i7 5930kMEM: Gskill Ripjaws ddr4 2800mhz 4gb x4GPU 2xEVGA GTX 980 ti classy'sssd: 960 evo mvne m.2 512gbPSU: EVGA supernova 1300w So i had problems with my old mobo i sent in for RMA it was giving me VGA leds and no video...

4 x 16GB memory recommendation

I am upgrading my memory for a 5960x on the Rampage V Extreme and moving the old Ripjaws 4 x 8 GB DDR4-2666 memory to a different motherboard from another manufacturer (AsRock OC).Looking for recommendations on what 4 x 16 GB memory tends to have a h...

CPU Cooler recommendation for Rampage V Extreme

Probably air-cooled else closed-loop water-cooled...please recommend for each or both...something maintenance-free.Two machines, one is Rampage V Extreme, the other is a competitor. The Rampage V Extreme is currently air cooled and with a 5960x, but ...

WIndows 10 install on 970 Pro M.2 NVMe crashes

Hi Friends,I'll try to be as specific as I can.My rig: (currently running under Win7 Pro SP1 64 bits)MB: Rampage V Extreme/U3.1 with Bios: 3701CPU: i7-5960X32 Gb memory: 4x8Gb modules Corsair CMK16GX4M2B3000C15current SSD: Samsung 850 EVO 500Gb (cont...

6900K wont pass 3.7Ghz no matter what.

Hello.i run with a 6900K and a Asus Rampage V Extreme, if I set the cpu to 100x37 = 1.0 vcore, it will boot and is stabil, if I sæt it to 100x40 / with same volt, it wont start, but with 1.150 it will.But now the real problem come, no matter what I d...

Rampage V Extreme - Which NVLink

Ok - I admit I'm proably being dumb - but before spending - which NVLink bridge is the correct one for a 2Card SLI setup using slots PCIE_X16_1 and PCIE_X16/X8_3.Is it the 60mm or the 80mm - I'm really not sure …Thanks for advice J

SSD compatibility with R5E/u3.1

I'm far from being a geek so I need your advice.I wish to add a SSD to my computer for installing W10 on it, in view of a dual boot with W7 x64 SP1My config is: (currently running under Win7 SP1 64 bits)MB: Rampage V Extreme/U3.1 with Bios: 3701CPU:...

Forum Posts