So, I was running an Intel i7 6850k OC'd to 4.3ghz / 1.35v on a ASUS Rampage V Edition 10 and a Corsair H110i for about 3 years with no issues, idle temps around 25-28c, full load under OCCT around 79c after 4 hours. Anyway, the other night the pump ...
With a whole week off for Christmas I was finally able to update my desktop. Took several days but finally got to a good spot. If you are hesitant to update some of this could be interesting to you.- MB is RVE10, and I've not updated the BIOS since...
Hi all, Not sure what happened if it was due to a update or what but my rampage 5 extreme ROG board will always want to boot to bios every time, I only have to make a change in the bios, save and exit and then all is good, boot to windows. can anyone...
Hello everyone. Overall I've been very happy with Asus ROG's high end products so when I went to purchase the Rampage V Edition 10 X99 motherboard, I was very happy to see the inclusion of the audio features. The idea that the baseline sound ch...
Buenos dias . tengo un problema con mi RAMPAGE V EXTREME/U3.1, cuando intento instalar windows 10 tengo problemas, lo soluciono quitando el boot secure y el csm pero si no me da error al instalar no me deja instalar los drivers de ningun dispositivo ...
I found new bios 3801 for R5E on the ASUS web site.The release date was 01 Dec 2017. It seems that the change log was almost same but They must have fixed several issues.1. Change log (from ASUS web site) - Improved DRAM stability - Fix Logitech ...
Hi,My system has been running beautifully until last week, tried to turn on, did not progress POST, got a short burst of fans etc, then shuts off, turns back on, QCODE 00, no beeps, BIOS is able to swap between the two chips.I'm a full time carer of ...
Hi everyone. I fitted a PCIe 3.0 NVMe SSD in to the only black PCIe slot on the Rampage V Extreme (3rd slot down) and the SSD speeds are WAY lower than they should be. So i looked at Crystal Disk Info, which said the slot is running in PCIe 2.0 x4 mo...
Hello,I have a computer I build few years ago.Everything was fine until today.I used it few hours, turned it off normally and when I wanted to turn it on again, nothing. The motherboard displays 00.As I understood it means the CPU is dead, but I can...
Hi,BIOS 2 posts fine with various versions, just updated to 4101 with no problemsBIOS 1 powers on but shows 00 error and restarts. I've tried updating it through USB key flashback - this looks like it's working... blinks and reads the usb as normal...
