X99
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Stopping stress test on RB causes system hang

Late last year i had a stable OC @4.6 and 1.33 vcore on an earlier bios (forgot what version). Recently i did a fresh install of windows and even updated my bios to 1902 mod and applied the same OC settings i had before. 46 across all cores100 strapx...

Lynkdev by Level 10
  • 3710 Views
  • 8 replies
  • 0 kudos

Uefi bios 1801

New UEFI BIOS 1801:http://dlcdnet.asus.com/pub/ASUS/mb/LGA2011/Rampage_V_Extreme/RAMPAGE-V-EXTREME-ASUS-1801.zipImprove system stability

Digi+ power settings

Just curious what everyone here has changed in the bios regarding these values and their oc?

Very odd question regarding video card frame rates.

OK bare with me a few seconds. I'll do my best to explain this.First know that I have indeed verified this by swapping various parts between my Z97 and X99 boxes. I have two 2560x1440 monitors. A Dell U2713HM and a Acer XB270HU. I have three 980Ti's ...

Perko by Level 8
  • 5847 Views
  • 12 replies
  • 0 kudos

5820K Overclock settings look right?

Hello hope yous can all help me out a bit. iv spent most of the day overclocking my 5820-k to 4.6Ghz. Just want to know if my settings look ok for 4.6ghz for 24/7 use. plus i want to know what settings i need to make, so that the CPU VCore will drop ...

Rampage V Extreme vs. MSI Godlike

Since almost 8 Months im a proud owner of the Asus Rampage V Extreme Mainboard. Since day one it was quite stable till some windows 10 issues arised. But they where solved quite fast. Since than my machine is stable and a joy for gaming. The intel 59...

Fan Xpert - A vs. B question

Hey all,When using Fan Xpert 3 inside of AI Suite, it shows all my fans (bottom right); however in the top section, it will not read a fan if it's on B vs. A port.I wanted to use 3B over 3A given its location and keeping the case clean. Is there any ...

54883

asus ac-rt5300 router and RVE wireless adapter

Hello,I could use some help here.Just got new router, was able to setup ton of things including link aggregation (port 1-2 connected to my switch which supports LACP).Now I have an synology NAS on that switch also with LACP at 4 ports, 2 for router a...

mirkoj by Level 7
  • 2028 Views
  • 0 replies
  • 0 kudos

5930k overclocking / cooling / newbie blowing stuff up! Lots of questions!

Hey all,Still getting my feet wet with everything OC. Kinda flying blind just learning as I go; however a few things. First off, my recently completed rig: http://pcpartpicker.com/p/K6CZ6hNow for all my questions, thank you in advance!1) My first pas...

adambean by Level 7
  • 8704 Views
  • 27 replies
  • 0 kudos