X99
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

CPU fan error with R5E10

Hi,Anyone else ran into sudden problems at boot?My CPU fans start late in the starting up process. Not sure if they started running earlier before this issue.So I get error message bout CPU fan error. I run setup and check that I have ignore on low l...

How do you fine tune memory clocks?

Is this even possible? E.G. the board says it supports 3333 Mhz memory, but you can normally only select 3200 or 3400.So how would I go about trying to clock the memory between 3200 and 3400?Because I have 3200 stable with very tight timings, but 340...

bhavvv by Level 7
  • 4358 Views
  • 7 replies
  • 0 kudos

Rampage v edition 10... error codes on start up (lots)

Hi when I start my comp, it takes about 30 secs to load up with an SSD (even my old build with sdd only took 10 secs) now ive had time to look at the error codes I get these in order 25, 41,19, 60, 67, bd then 00, 41, then it goes from bd to 67 a few...

New Samsung M.2 drives

Looks good:http://www.guru3d.com/news-story/samsung-1tb-nvme-m-2-ssd-sm961-ships-next-week.html

Hopper64 by Level 16
  • 16935 Views
  • 26 replies
  • 0 kudos

Question about RE5E10 Ext fan board.

Very simple.... Is this board considered a PWM board or DC board?I ask because I have three PWM fans connected to it. Switching the setting to DC, with Standard setting, the fans ramp up to 1500RPM or about 75-80% of their speed. Switching it to PW...

RAMPAGE V EDITION 10 : windows 10 hangs on logo

Hello everyoneexcuse-me for my english, it's a mixed of google and mine. during startup, Windows hangs on the logo of the window blue on black, and the little points that revolve do not appear. If I press the on / off button on the PC, it turns off d...

Fast boot on or off

Hi to all,during attempt to make a WOL feature works, on bios I've disabled the fast boot and now the boot is fastest, 10 second more with fast boot enabled.33 seconds after beep (post ok) with fast boot, 23 seconds after beep (post ok) without fast ...

Asus Rampge V Edition 10 - Memory missing

When I originally built this pc, I had 4x4gb G.skill Ripjaws V Series 3200mhz, I was getting the bd error and the pc would not post. I followed the instructions here and got to roughly 1.5v before I started to gert concerned. Around this time it occu...

rampage v edition 10 LED's + gpu leds sync?

i have the rampage v edition 10 mb and the rog strix 1080 with leds ofc, how do I get them both to cycle through the same colors? they are both random atm -.-'please post links to the relative software if any!Thanks in advance !

Top Kudoed Authors