X99 - Page 106 - Republic of Gamers Forum

cpu overvoltage error

Hi everyone, yesterday i flashed my 2nd bios chip to 3301 and after few hours at a restart of win updates gave me that error. I pressed f1 and i saw in bios that v core was at 1.7 while i had it at 1.29 (4.5ghz). I saw other persons here that had tha...

Xeon compatibility?

Hello and thank you for your time. I am starting my first build and was wondering if a Xeon e5-2650 v3 would work with a Rampage V Extreme? I know it's a server processor, but it says it supports socket 2011-v3. Thanks in advance for your help!

Rampage Extreme V Edition 10 driver support page, gone?

So I normally go to the product page at: https://www.asus.com/ca-en/Motherboards/ROG-RAMPAGE-V-EDITION-10/Then click on support and I can then pick Drivers, my OS and I can download and check on latest drivers.But the Support button, which is usually...

New Windows Anniversary patch/update is out

31 August edition.Haven't tried yet, but may help with board problems...https://support.microsoft.com/en-au/help/12387/windows-10-update-history

Rampage Extreme V Edition 10 issues - LIst of problems!

Thought I'd list all the issues I'm having in case anyone out there has a solution to any of them.Some of these may be related to the Windows 10 Anniversary, although some were present before.This must be the buggiest AND MOST EXPENSIVE motherboard I...

CPU fan error with R5E10

Hi,Anyone else ran into sudden problems at boot?My CPU fans start late in the starting up process. Not sure if they started running earlier before this issue.So I get error message bout CPU fan error. I run setup and check that I have ignore on low l...

How do you fine tune memory clocks?

Is this even possible? E.G. the board says it supports 3333 Mhz memory, but you can normally only select 3200 or 3400.So how would I go about trying to clock the memory between 3200 and 3400?Because I have 3200 stable with very tight timings, but 340...

Rampage v edition 10... error codes on start up (lots)

Hi when I start my comp, it takes about 30 secs to load up with an SSD (even my old build with sdd only took 10 secs) now ive had time to look at the error codes I get these in order 25, 41,19, 60, 67, bd then 00, 41, then it goes from bd to 67 a few...

New Samsung M.2 drives

Looks good:http://www.guru3d.com/news-story/samsung-1tb-nvme-m-2-ssd-sm961-ships-next-week.html

Question about RE5E10 Ext fan board.

Very simple.... Is this board considered a PWM board or DC board?I ask because I have three PWM fans connected to it. Switching the setting to DC, with Standard setting, the fans ramp up to 1500RPM or about 75-80% of their speed. Switching it to PW...

Forum Posts