11-22-2014
08:49 AM
- last edited on
03-06-2024
03:40 AM
by
ROGBot
11-22-2014 09:09 AM
11-23-2014 08:51 AM
Chino wrote:
Everything looks fine. Both vcore and temperature is within limit.
If you're feeling adventurous, you can try overclocking your memory or keep going up the CPU frequency ladder.
11-25-2014 08:48 PM
Chino wrote:
Everything looks fine. Both vcore and temperature is within limit.
If you're feeling adventurous, you can try overclocking your memory or keep going up the CPU frequency ladder.
11-25-2014 08:52 PM
LiveOrDie wrote:
What stress tests did you run i wouldn't think that overclock would be AVX stable most chips can't run AVX stress tests but pass others just fine.
11-25-2014 10:21 PM
Johnny5 wrote:
I have ran RealBench and 3D Mark with it and have played a variety of games. I haven't ran Prime yet. No crashes or hiccups yet.
11-26-2014 03:50 AM
LiveOrDie wrote:
I used linx 0.6.5 to get my overclock stable needed 1.24v adaptive for 4.3ghz .
11-23-2014 08:46 AM
Johnny5 wrote:
Hello All,
I wanted to share my overclock and hopefully get some feedback on some possible tweaks.
Core Speed - 4.6
CPU Core Voltage - 1.36250
DRAM V - 1.2
XMP - 2666mhz
Multiplier is 100x46 sync all cores
CPU Cache Voltage is 1.2v
CPU Cache Ratio - 24
BCLK - 100
Temps - ~mid 30s idle with pump set to trickle and rad fans running at low rpm. Max temps have reach mid to upper 50s.
System specs are in sig. I like to run this 24/7, gaming, and the occasional benchmark.
Any thoughts or feedback would be greatly appreciated.
Thanks!
11-25-2014 08:57 PM
Randolla wrote:
What is your System Agent Voltage set to?