©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

cave-fox · 02-26-2025

The new M.2 latch (X870-Z890) makes it difficult to secure an SSD with a heat sink.The A type (under the CPU) can be firmly secured, but the other simple types do not have long enough claws! They make noise and vibrate. This is an area that needs imp...

cave-fox · 02-10-2025

I am using a strix b650E-E motherboard. When using SPDIF, audio is lost. Rebooting fixes this, but it's inconvenient. MSI and others provide new firmware, but ASUS does not. It seems this is a widely reported problem and not just mine. ASUS, please u...

cave-fox · 04-03-2024

1.Weight is not listed in the specs. I think weight is a very important factor, but it is not listed. It would be helpful if you could write it down.2.I don't understand the recording style of the LED. I don't like application control, so I'm looking...

cave-fox · 02-26-2025

Sorry,number 5 is a typo.

cave-fox · 02-26-2025

I think I misunderstood.I've been using an SSD with a heat sink since the beginning. When I use the latch to attach it, it's not fixed and it's wobbly. This problem doesn't occur in the top slot. It only occurs with the simplified latch. 2.3.4.5 M.2

cave-fox · 02-26-2025

If you are having the same problem with an SSD with a heatsink, try rotating the latch a little after installing the SSD in the New M.2 Q-Latch. This will make it a little stronger. However, this is structurally unable to hold the SSD tightly.

cave-fox · 02-26-2025

The simple type clearly has weaker holding power and is a bit of a shortcut. The previous Q-latch could hold things perfectly, but now it can't.

cave-fox · 02-17-2025

Thank you. I will patiently wait for the firmware update. Only the S/PDIF is causing problems.

User Statistics

User Activity

The new M.2 Q-Latch cannot secure SSDs with heatsinks.

Please provide a firmware update for the ALC4080.

What you don't know about asus graphics cards.

Re: The new M.2 Q-Latch cannot secure SSDs with heatsinks.

Re: The new M.2 Q-Latch cannot secure SSDs with heatsinks.

Re: The new M.2 Q-Latch cannot secure SSDs with heatsinks.

Re: The new M.2 Q-Latch cannot secure SSDs with heatsinks.

Re: Please provide a firmware update for the ALC4080.