©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

madscribbler · 12-31-2023

I have the board mentioned, and corsair dominator 5600mhz 2x48GB modules installed. With the 220 bios (initial release) the board is slightly unstable (one random reboot every 3 days ish) at XMP II, and seems completely stable with XMP I. Post and ...

madscribbler · 12-31-2023

I have the board mentioned, and corsair dominator 5600mhz 2x48GB modules installed. With the 220 bios (initial release) the board is slightly unstable (one random reboot every 3 days ish) at XMP II, and seems completely stable with XMP I. Post and ...

madscribbler · 01-08-2024

Well, on the marvell site, under network adapters, are like 8-10 different chipsets supported. Maybe try some of the other ones. It appears they check if the firmware is valid for the device at hand, so if one works, you're probably good with it.

madscribbler · 01-06-2024

Huh, something new I learned is my box has integrated graphics. I've always used my 4080 so never knew. I always thought the k came without, and the kf came with. But you're right, looking at the intel page for the k, it should have integrated gra...

madscribbler · 01-05-2024

The 14900k does not have a built-in GPU. d6 is the display code when there is no GPU.

madscribbler · 01-05-2024

Sorry, I read back and hadn't realized that in your case it's a part of the board, I run my marvel 10Gbe adapters as a PCI cards. My advice probably doesn't apply.

madscribbler · 01-04-2024

Sorry, got the part # wrong - it's CMH96GX5M2B5600C40.

User Statistics

User Activity

ROG STRIX Z790-E WIFI II Board Stable @ BIOS 220, Unstable @ BIOS 801

ROG STRIX z790-e WiFi II Board Stable at Bios 220, Won't Post with Bios 801

Re: Marvell AQtion 10gbit adapter on my X670E Extreme only works every 1-10 bootup

Re: Strx z790 E issue

Re: Strx z790 E issue

Re: Marvell AQtion 10gbit adapter on my X670E Extreme only works every 1-10 bootup

Re: ROG STRIX z790-e WiFi II Board Stable at Bios 220, Won't Post with Bios 801