This is still a fairly new build. Only really been running it regularly for the last few weeks. And it's been running fine to this point. When I tried to boot up a couple days ago, though, the motherboard stopped at Q-Code 00. The Processor fan w...
So, it happened again this morning, but it didn't happen yesterday. So it's intermittent, which I find odd. This time I found that I didn't necessarily have to completely depower the motherboard to get it to work. I just held down the front power ...
bayfront_benny wrote:I had this same problem. Followed another posters recommendations as follows1- Disable CPU SVID Support (Extreme tweaker menu)2. Turn Anti Surge Support off (Monitor menu)In my case - so far so good.Thanks for the suggestion. Si...
Chino wrote:Have you populated the 8 pin power header on your motherboard? Also try loosening the screws for your heatsink a little.The 8-pin power is plugged in. I will try loosening the proc cooler and see if that helps.Thanks
The CPU seems to be installed correctly. I thought I had the latest bios since EZ Update said there were no updates, but I just went to the support page after reading your reply, and it seems there's been an update since the last time I updated. I'...
