Make sure that under Power Management section on your Network card properties the 'Wake on Pattern Match' is turned off. If you have that turned on any number of packets on your network can keep your PC awake.

I found the AI Suite FanExpert to be quite useful to tune the fan profiles. Much easier than using the BIOS. I don't use AI suite for anything else. So the trick is to go into windows after you run FanEXpert to tune the fans and turn off/disable a...

I also haven't had any of the issues discussed here. I have it hooked up to a Yamaha receiver and the sound is quite good. No issues with headphones either. I am not an audiophile, but I do care about good quality sound and the Hero VII audio prov...

If you watch the Q code while the system is booting up it goes to A0 when bios hands it over to windows. If you watch the Q code while Windows is coming up you will see that the Q code goes to 00 when the fans spin up to max for a second. This is w...

Sherrifjb, I see the same behavior on my set up. It behaves as though the CPU or the motherboard maps a range of Vcore values to one fixed value. If I set my manual Vcore anywhere between 1.150 and 1.200, it always uses 1.232 at load. I also have...