I have a couple of questions. I have a 2600K at 5.0GHz at 1.515v. Even though it temps are normally at 50C-70C, It has degraded I believe. It started BSOD’ing and now it takes a lot more voltage to even keep it at 4.5Ghz. Its voltage mode is set ...
The Realtek Audio Console from the MS store will not run. I am getting the error "Can not connect to RPC service". I have been through all 46 pages here and can only find one reference to it on page 18. But nothing there helps. I have followed th...
This update is a disaster for me. Updated and lost memory speed - won't even boot at 4000Mhz now. Same as previous XMP settings and even tried some new ones. 3800Mhz will boot but will not pass any stress test. And this is all on Auto for process...
Complete reinstall was the only thing that worked for me. Here are my details...960 Pro with 2B6QCXP7 firmware and MS driver NVM Express Controller 10.0.16299.15(5) WD RE3 in RAID 0 - IRST driver 15.7.1.1015ASUS X299 Deluxe Prime 0802In RAID mode bu...
Another sample point for all on my X299 Prime Deluxe. I am running 4.8 (Silicon Lottery 4.7 purchase) using 1.3v. Running 4000Mhz memory. I'm on water using Koolance's best. Still cannot contain heat!Addiecool's sample is the only one I could find...
I have a failing Rampage IV Extreme with a 3930K running 4.7GHz with a Koolance EX2-1055. The ASMedia drivers don't work well with Windows 10 and I am down to the wire with my 5 year 6 month old machine. That being said, I need to build a machine r...