Do you guys normally install GNA and Serial IO drivers on a fresh windows install or do you usually leaves those out and install later if you need them? Also, would you say it makes sense to install Chipset or ME driver/Firmware first? Thanks!
For secure boot do you guys use standard or custom? Is there any advantage to custom over standard and if so does it make sense to clear the boot keys / reset on a new install?
I know some z690 boards had WHEA 17 errors and I just noticed that I started to get them every 20-30 ish minutes or so. Has anyone else encountered this on the z790 boards?A corrected hardware error has occurred.Component: PCI Express Root PortError ...
Anyone else getting boot loops with their Z790 Hero with the new gskill 7600 ram? I got the F5-7600J3646G16G and it's on the approved ram list with the hero but I'm getting bootloops at xmp and even at 7000 I'm getting ram errors.
MoKiChU wrote:Hi,Only Sonic Radar III is optional. Realtek Audio Control/Console + Sonic Studio III + DTS Sound Unbound are necessary but not imperative in absolute terms, you can uninstall them all, but from my point of view, for an optimal use the ...
3) This cannot happen one way or the other, the Intel ME firmwares and sub firmwares are signed by Intel and compiled by an Intel tool. When flashing your Intel ME Firmware, the Intel flashing tool performs some checks before flashing the Intel ME Fi...
Hi,I have some purely knowledge questions that it's okay if you don't feel like answering but I was curious about.1.) Is it okay to install intel ME firmware while in windows safe mode?2.) When running your ME firmware install and it goes to reboot, ...
