The symptom
With the NVidia RTX PRO 6000 Blackwell installed in either x16 slot the board hangs at Q-Code d4 (“PCI resource allocation error. Out of resources”) during early POST; no video output. RTX 4090 FE and a RTX 5090 both boot fine in the same...
Hello,On my ASUS Maximus Z790 Dark Hero, I have set the ASUS Multicore Enhancement to Disable - Enforce all limits, Long Duration Package Power Limits to 253W and the Short Duration Package Power Limits to 320W. Since I'm enforcing all limits with th...
Hello everyone,I have a custom hardline cooling loop for an RTX4090 and 13900KS on an ASUS Maximus Z790 Hero. I’m hoping to reuse the loop –without modifications— on an ASUS Maximus Z790 Dark Hero with a 14900K. The water block will work fine but I’m...
Greetings everyone,
I've recently undergone a system upgrade, the specs of which are listed below. However, I've run into some troublesome issues including WHEA Errors, BSODs, and application crashes. The system initially ran smoothly for about thr...
Hello Everyone,It's been a long time since I posted on the forums so first, let me say hello to you all.
I purchased an Asus Maximus Z790 Hero and finally got it up and running with an intel i9 13900KS and RTX4090 TUF Gaming OC. Everything is stabl...
Great and thank you. I think that the socket is in the same location as the Hero as well. This should be a drop-in replacement without having to cut new tubing. Thanks again.
I do have MCE disabled. I'll add it to the troubleshooting steps.
I will try this. For the record, I can only run the test if the SVID behavior is set to Intel Failsafe and the Specific Core Ratio for P-Cores 5 and 6 are set to 56. Without those set...
